When an error occurs, existing logging uses dbg() so the cause of a 
problem is hard to determine. Error conditions shouldn't only be 
properly reported with debugging enabled.

A side effect of this change is that when an uninitialised device 
is started, a log message similar to the following is sent:
        cxacru 5-2:1.0: receive of cm 0x90 failed (-104)
This is normal - the device did not respond so firmware will be 
loaded.

Signed-Off-By: Simon Arlott <[EMAIL PROTECTED]>
---
This could be added to 2.6.23 since it only makes error logging 
more verbose.

 drivers/usb/atm/cxacru.c |   29 ++++++++++++++++++-----------
 1 files changed, 18 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index a73e714..8d8a107 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -482,7 +482,8 @@ static int cxacru_cm(struct cxacru_data *instance, enum 
cxacru_cm_request cm,
        int rbuflen = ((rsize - 1) / stride + 1) * CMD_PACKET_SIZE;
 
        if (wbuflen > PAGE_SIZE || rbuflen > PAGE_SIZE) {
-               dbg("too big transfer requested");
+               usb_err(instance->usbatm, "requested transfer size too large 
(%d, %d)\n",
+                       wbuflen, rbuflen);
                ret = -ENOMEM;
                goto fail;
        }
@@ -493,7 +494,8 @@ static int cxacru_cm(struct cxacru_data *instance, enum 
cxacru_cm_request cm,
        init_completion(&instance->rcv_done);
        ret = usb_submit_urb(instance->rcv_urb, GFP_KERNEL);
        if (ret < 0) {
-               dbg("submitting read urb for cm %#x failed", cm);
+               usb_err(instance->usbatm, "submit of read urb for cm %#x failed 
(%d)\n",
+                       cm, ret);
                ret = ret;
                goto fail;
        }
@@ -510,27 +512,28 @@ static int cxacru_cm(struct cxacru_data *instance, enum 
cxacru_cm_request cm,
        init_completion(&instance->snd_done);
        ret = usb_submit_urb(instance->snd_urb, GFP_KERNEL);
        if (ret < 0) {
-               dbg("submitting write urb for cm %#x failed", cm);
+               usb_err(instance->usbatm, "submit of write urb for cm %#x 
failed (%d)\n",
+                       cm, ret);
                ret = ret;
                goto fail;
        }
 
        ret = cxacru_start_wait_urb(instance->snd_urb, &instance->snd_done, 
NULL);
        if (ret < 0) {
-               dbg("sending cm %#x failed", cm);
+               usb_err(instance->usbatm, "send of cm %#x failed (%d)\n", cm, 
ret);
                ret = ret;
                goto fail;
        }
 
        ret = cxacru_start_wait_urb(instance->rcv_urb, &instance->rcv_done, 
&actlen);
        if (ret < 0) {
-               dbg("receiving cm %#x failed", cm);
+               usb_err(instance->usbatm, "receive of cm %#x failed (%d)\n", 
cm, ret);
                ret = ret;
                goto fail;
        }
        if (actlen % CMD_PACKET_SIZE || !actlen) {
-               dbg("response is not a positive multiple of %d: %#x",
-                               CMD_PACKET_SIZE, actlen);
+               usb_err(instance->usbatm, "invalid response length to cm %#x: 
%d\n",
+                       cm, actlen);
                ret = -EIO;
                goto fail;
        }
@@ -538,12 +541,14 @@ static int cxacru_cm(struct cxacru_data *instance, enum 
cxacru_cm_request cm,
        /* check the return status and copy the data to the output buffer, if 
needed */
        for (offb = offd = 0; offd < rsize && offb < actlen; offb += 
CMD_PACKET_SIZE) {
                if (rbuf[offb] != cm) {
-                       dbg("wrong cm %#x in response", rbuf[offb]);
+                       usb_err(instance->usbatm, "wrong cm %#x in response to 
cm %#x\n",
+                               rbuf[offb], cm);
                        ret = -EIO;
                        goto fail;
                }
                if (rbuf[offb + 1] != CM_STATUS_SUCCESS) {
-                       dbg("response failed: %#x", rbuf[offb + 1]);
+                       usb_err(instance->usbatm, "response to cm %#x failed: 
%#x\n",
+                               cm, rbuf[offb + 1]);
                        ret = -EIO;
                        goto fail;
                }
@@ -582,14 +587,16 @@ static int cxacru_cm_get_array(struct cxacru_data 
*instance, enum cxacru_cm_requ
        for (offb = 0; offb < len; ) {
                int l = le32_to_cpu(buf[offb++]);
                if (l > stride || l > (len - offb) / 2) {
-                       dbg("wrong data length %#x in response", l);
+                       usb_err(instance->usbatm, "invalid data length from cm 
%#x: %d\n",
+                               cm, l);
                        ret = -EIO;
                        goto cleanup;
                }
                while (l--) {
                        offd = le32_to_cpu(buf[offb++]);
                        if (offd >= size) {
-                               dbg("wrong index %#x in response", offd);
+                               usb_err(instance->usbatm, "wrong index #%x in 
response to cm #%x\n",
+                                       offd, cm);
                                ret = -EIO;
                                goto cleanup;
                        }
-- 
1.5.0.1

-- 
Simon Arlott
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to