Multi Core Timer node has interrupts routed to two different parents -
GIC and combiner. This was modeled with a interrupt-map within a
subnode but can be expressed in an easier and more common way, directly
in the node itself.
Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>
---
Not tested.
---
arch/arm/boot/dts/exynos5250.dtsi | 30 ++++++++++++------------------
1 file changed, 12 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi
b/arch/arm/boot/dts/exynos5250.dtsi
index 7a01349317a3..e0fcf3c2f537 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -233,28 +233,22 @@
power-domains = <&pd_mau>;
};
- timer@101c0000 {
+ mct: timer@101c0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0x800>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&mct_map>;
- interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
- <4 0>, <5 0>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
clock-names = "fin_pll", "mct";
-
- mct_map: mct-map {
- #interrupt-cells = <2>;
- #address-cells = <0>;
- #size-cells = <0>;
- interrupt-map = <0x0 0 &combiner 23 3>,
- <0x1 0 &combiner 23 4>,
- <0x2 0 &combiner 25 2>,
- <0x3 0 &combiner 25 3>,
- <0x4 0 &gic 0 120
IRQ_TYPE_LEVEL_HIGH>,
- <0x5 0 &gic 0 121
IRQ_TYPE_LEVEL_HIGH>;
- };
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&mct>;
+ interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
+ interrupt-map = <0 &combiner 23 3>,
+ <1 &combiner 23 4>,
+ <2 &combiner 25 2>,
+ <3 &combiner 25 3>,
+ <4 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
+ <5 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_0: pinctrl@11400000 {
--
2.17.1
