Dan,
One more remark below.
On 9/20/19 7:41 PM, Dan Murphy wrote:
> Introduce a multicolor class that groups colored LEDs
> within a LED node.
>
> The framework allows for dynamically setting individual LEDs
> or setting brightness levels of LEDs and updating them virtually
> simultaneously.
>
> Signed-off-by: Dan Murphy <dmur...@ti.com>
> ---
> drivers/leds/Kconfig | 10 +
> drivers/leds/Makefile | 1 +
> drivers/leds/led-class-multicolor.c | 316 +++++++++++++++++++++++++++
> include/linux/led-class-multicolor.h | 76 +++++++
> 4 files changed, 403 insertions(+)
> create mode 100644 drivers/leds/led-class-multicolor.c
> create mode 100644 include/linux/led-class-multicolor.h
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 6e7703fd03d0..cfb1ebb6517f 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -30,6 +30,16 @@ config LEDS_CLASS_FLASH
[...]
> +static int led_multicolor_init_color_dir(struct led_classdev_mc_data *data,
> + struct led_classdev_mc *mcled_cdev)
> +{
> + struct led_classdev *led_cdev = mcled_cdev->led_cdev;
> + u32 color_id;
> + int ret;
> + int i, j = 0;
> +
> + data->mcled_cdev = mcled_cdev;
> +
> + ret = sysfs_create_group(&led_cdev->dev->kobj, &led_color_group);
> + if (ret)
> + return ret;
> +
> + for (i = 0; i < LED_COLOR_ID_MAX; i++) {
> + color_id = (mcled_cdev->available_colors & (1 << i));
Please use bitops for accessing available_colors.
> + if (color_id) {
Here you need: if (test_bit(i, &mcled_cdev->available_colors))
> + ret = led_multicolor_init_color(data, mcled_cdev, i, j);
> + if (ret)
> + break;
> +
> + j++;
> + }
> + }
> +
> + return ret;
> +}
--
Best regards,
Jacek Anaszewski
