Multi Core Timer node has interrupts routed to two different parents -
GIC and combiner. This was modeled with a interrupt-map within a
subnode but can be expressed in an easier and more common way, directly
in the node itself.
Tested on Odroid XU (Exynos5410), Odroid HC1 (Exynos5422) and Arndale
Octa (Exynos5420).
Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>
---
Changes since v3:
1. Use interrupts-extended instead of interrupts-map.
---
arch/arm/boot/dts/exynos54xx.dtsi | 33 +++++++++++--------------------
1 file changed, 12 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi
b/arch/arm/boot/dts/exynos54xx.dtsi
index 247d23872384..aca1b4831e38 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -67,27 +67,18 @@
mct: timer@101c0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101c0000 0xb00>;
- interrupt-parent = <&mct_map>;
- interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
- <8>, <9>, <10>, <11>;
-
- mct_map: mct-map {
- #interrupt-cells = <1>;
- #address-cells = <0>;
- #size-cells = <0>;
- interrupt-map = <0 &combiner 23 3>,
- <1 &combiner 23 4>,
- <2 &combiner 25 2>,
- <3 &combiner 25 3>,
- <4 &gic 0 120
IRQ_TYPE_LEVEL_HIGH>,
- <5 &gic 0 121
IRQ_TYPE_LEVEL_HIGH>,
- <6 &gic 0 122
IRQ_TYPE_LEVEL_HIGH>,
- <7 &gic 0 123
IRQ_TYPE_LEVEL_HIGH>,
- <8 &gic 0 128
IRQ_TYPE_LEVEL_HIGH>,
- <9 &gic 0 129
IRQ_TYPE_LEVEL_HIGH>,
- <10 &gic 0 130
IRQ_TYPE_LEVEL_HIGH>,
- <11 &gic 0 131
IRQ_TYPE_LEVEL_HIGH>;
- };
+ interrupts-extended = <&combiner 23 3>,
+ <&combiner 23 4>,
+ <&combiner 25 2>,
+ <&combiner 25 3>,
+ <&gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic 0 121 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic 0 122 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic 0 123 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic 0 128 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic 0 129 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic 0 130 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic 0 131 IRQ_TYPE_LEVEL_HIGH>;
};
watchdog: watchdog@101d0000 {
--
2.17.1
