[PATCH v10 09/16] ARM: dts: n900: Add reg property to the LP5523 channel node

[Dan Murphy]

Add the reg property to each channel node.  This update is
to accomodate the multicolor framework.  In addition to the
accomodation this allows the LEDs to be placed on any channel
and allow designs to skip channels as opposed to requiring
sequential order.

Signed-off-by: Dan Murphy <dmur...@ti.com>
CC: Tony Lindgren <t...@atomide.com>
CC: "Benoît Cousson" <bcous...@baylibre.com>

k# interactive rebase in progress; onto ae89cc6d4a8c
---
 arch/arm/boot/dts/omap3-n900.dts | 29 ++++++++++++++++++++---------
 1 file changed, 20 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 84a5ade1e865..643f35619246 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -607,63 +607,74 @@
        };
 
        lp5523: lp5523@32 {
+               #address-cells = <1>;
+               #size-cells = <0>;
                compatible = "national,lp5523";
                reg = <0x32>;
                clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
                enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
 
-               chan0 {
+               chan@0 {
                        chan-name = "lp5523:kb1";
                        led-cur = /bits/ 8 <50>;
                        max-cur = /bits/ 8 <100>;
+                       reg = <0>;
                };
 
-               chan1 {
+               chan@1 {
                        chan-name = "lp5523:kb2";
                        led-cur = /bits/ 8 <50>;
                        max-cur = /bits/ 8 <100>;
+                       reg = <1>;
                };
 
-               chan2 {
+               chan@2 {
                        chan-name = "lp5523:kb3";
                        led-cur = /bits/ 8 <50>;
                        max-cur = /bits/ 8 <100>;
+                       reg = <2>;
                };
 
-               chan3 {
+               chan@3 {
                        chan-name = "lp5523:kb4";
                        led-cur = /bits/ 8 <50>;
                        max-cur = /bits/ 8 <100>;
+                       reg = <3>;
                };
 
-               chan4 {
+               chan@4 {
                        chan-name = "lp5523:b";
                        led-cur = /bits/ 8 <50>;
                        max-cur = /bits/ 8 <100>;
+                       reg = <4>;
                };
 
-               chan5 {
+               chan@5 {
                        chan-name = "lp5523:g";
                        led-cur = /bits/ 8 <50>;
                        max-cur = /bits/ 8 <100>;
+                       reg = <5>;
                };
 
-               chan6 {
+               chan@6 {
                        chan-name = "lp5523:r";
                        led-cur = /bits/ 8 <50>;
                        max-cur = /bits/ 8 <100>;
+                       reg = <6>;
                };
 
-               chan7 {
+               chan@7 {
                        chan-name = "lp5523:kb5";
                        led-cur = /bits/ 8 <50>;
                        max-cur = /bits/ 8 <100>;
+                       reg = <7>;
                };
 
-               chan8 {
+               chan@8 {
                        chan-name = "lp5523:kb6";
                        led-cur = /bits/ 8 <50>;
                        max-cur = /bits/ 8 <100>;
+                       reg = <8>;
                };
        };
 
-- 
2.22.0.214.g8dca754b1e