[PATCH 3/7] iio: adc: max1027: Reset the device at probe time

[Miquel Raynal]

All the registers are configured by the driver, let's reset the chip
at probe time, avoiding any conflict with a possible earlier
configuration.

Signed-off-by: Miquel Raynal <miquel.ray...@bootlin.com>
---
 drivers/iio/adc/max1027.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c
index 823223b77a70..f9b473ee6711 100644
--- a/drivers/iio/adc/max1027.c
+++ b/drivers/iio/adc/max1027.c
@@ -466,6 +466,14 @@ static int max1027_probe(struct spi_device *spi)
                }
        }
 
+       /* Internal reset */
+       st->reg = MAX1027_RST_REG;
+       ret = spi_write(st->spi, &st->reg, 1);
+       if (ret < 0) {
+               dev_err(&indio_dev->dev, "Failed to reset the ADC\n");
+               return ret;
+       }
+
        /* Disable averaging */
        st->reg = MAX1027_AVG_REG;
        ret = spi_write(st->spi, &st->reg, 1);
-- 
2.20.1