On Thu, Sep 12, 2019 at 10:29:28PM +0200, Parthiban Nallathambi wrote:
> Extend Phycore i.MX6UL SoM for i.MX6ULL with on board eMMC. Phycore
> i.MX6ULL is deployed with same carrier board Segin as the pins are
> compatible with UL version.
>
> Signed-off-by: Parthiban Nallathambi <p...@denx.de>
What is the base that the patch was generated from? It doesn't apply to
my tree.
Shawn
> ---
> arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi | 26 +++++++++++++++++--
> .../dts/imx6ul-phytec-phyboard-segin-full.dts | 5 ++++
> arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi | 24 +++++++++++++++++
> 3 files changed, 53 insertions(+), 2 deletions(-)
> create mode 100644 arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi
>
> diff --git a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
> b/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
> index fc2997449b49..822a178ce438 100644
> --- a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
> +++ b/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
> @@ -7,7 +7,6 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/pwm/pwm.h>
> -#include "imx6ul.dtsi"
>
> / {
> model = "Phytec phyCORE i.MX6 UltraLite";
> @@ -65,7 +64,7 @@
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_gpmi_nand>;
> nand-on-flash-bbt;
> - status = "okay";
> + status = "disabled";
> };
>
> &i2c1 {
> @@ -90,6 +89,15 @@
> status = "okay";
> };
>
> +&usdhc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + bus-width = <8>;
> + no-1-8-v;
> + non-removable;
> + status = "disabled";
> +};
> +
> &iomuxc {
> pinctrl_enet1: enet1grp {
> fsl,pins = <
> @@ -145,4 +153,18 @@
> >;
> };
>
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9
> + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9
> + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9
> + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9
> + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9
> + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
> + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9
> + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9
> + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9
> + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9
> + >;
> + };
> };
> diff --git a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
> b/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
> index b6a1407a9d44..76f2447f2657 100644
> --- a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
> +++ b/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
> @@ -5,6 +5,7 @@
> */
>
> /dts-v1/;
> +#include "imx6ul.dtsi"
> #include "imx6ul-phytec-pcl063.dtsi"
> #include "imx6ul-phytec-phyboard-segin.dtsi"
> #include "imx6ul-phytec-peb-eval-01.dtsi"
> @@ -37,6 +38,10 @@
> status = "okay";
> };
>
> +&gpmi {
> + status = "okay";
> +};
> +
> &i2c_rtc {
> status = "okay";
> };
> diff --git a/arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi
> b/arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi
> new file mode 100644
> index 000000000000..3f749d9f09a5
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ull-phytec-pcl063.dtsi
> @@ -0,0 +1,24 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2018 PHYTEC Messtechnik GmbH
> + * Author: Stefan Riedmueller <s.riedmuel...@phytec.de>
> + */
> +
> +#include "imx6ul-phytec-pcl063.dtsi"
> +
> +/ {
> + model = "PHYTEC phyCORE-i.MX 6ULL";
> + compatible = "phytec,imx6ull-pcl063", "fsl,imx6ull";
> +};
> +
> +&iomuxc {
> + /delete-node/ gpioledssomgrp;
> +};
> +
> +&iomuxc_snvs {
> + pinctrl_gpioleds_som: gpioledssomgrp {
> + fsl,pins = <
> + MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0
> + >;
> + };
> +};
> --
> 2.21.0
>
