Am 07.10.19 um 11:32 schrieb Mika Westerberg: > On Sat, Oct 05, 2019 at 09:34:41AM +0200, Matthias Andree wrote: >> Am 04.10.19 um 15:06 schrieb Mika Westerberg: >>> On Fri, Oct 04, 2019 at 02:57:21PM +0200, Matthias Andree wrote: >>>> Am 04.10.19 um 14:39 schrieb Mika Westerberg: >>>>> @Matthias, @Paul and @Nicholas, I appreciate if you could check that this >>>>> does not cause any issues for your systems. >>>> Just to be sure: is this intended to be applied against the 5.4-rc* >>>> master branch? >>> Yes, it applies on top of v5.4-rc1. >> I am sorry to say that I cannot currently test - my computer has a >> GeForce 1060-6GB an no onboard/on-chip graphics. >> The nvidia module 435.21 does not compile against 5.4-rc* for me (5.3.1 >> was fine). > I think the two patches should apply cleanly on 5.3.x as well.
Mika, that worked. With your two patches on top of Linux 5.3.4, two Suspend-to-RAM cycles (ACPI S3), one Suspend-to-disk cycle (ACPI S4), no regressions observed => success? Let me know off-list if you need any of my "usual logs" from my test script. One blank line added to delineate Greg's release from your patches: > * 9c2dfb396722 2019-10-04 | PCI: Add missing link delays required by > the PCIe spec (HEAD -> linux-5.3.y) [Mika Westerberg] > * 00103c8c3fa8 2019-10-04 | PCI: Introduce pcie_wait_for_link_delay() > [Mika Westerberg] > > * ed56826f1779 2019-10-05 | Linux 5.3.4 (tag: v5.3.4, > stable/linux-5.3.y) [Greg Kroah-Hartman] > * d0b85a37c06b 2019-09-04 | platform/chrome: cros_ec_rpmsg: Fix race > with host command when probe failed [Pi-Hsun Shih] > * bec8c6dec605 2019-09-22 | mt76: mt7615: fix mt7615 firmware path > definitions [Lorenzo Bianconi] > * 5dab55b417ca 2019-07-02 | mt76: mt7615: always release sem in > mt7615_load_patch [Lorenzo Bianconi] > * 88688a6cd741 2019-09-09 | md/raid0: avoid RAID0 data corruption due > to layout confusion. [NeilBrown] Regards, Matthias
