Hi,
<Snip>
> On 18.3.2019 13.32, Appana Durga Kedareswara rao wrote:
> > AXI CAN IP and CANPS IP supports tx fifo empty feature, this patch
> > updates the flags field for the same.
> >
> > Signed-off-by: Appana Durga Kedareswara rao
> > <appana.durga....@xilinx.com>
> > ---
> > drivers/net/can/xilinx_can.c | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/drivers/net/can/xilinx_can.c
> > b/drivers/net/can/xilinx_can.c index 2de51ac..22569ef 100644
> > --- a/drivers/net/can/xilinx_can.c
> > +++ b/drivers/net/can/xilinx_can.c
> > @@ -1428,6 +1428,7 @@ static const struct dev_pm_ops xcan_dev_pm_ops
> =
> > { };
> >
> > static const struct xcan_devtype_data xcan_zynq_data = {
> > + .flags = XCAN_FLAG_TXFEMP,
> > .bittiming_const = &xcan_bittiming_const,
> > .btr_ts2_shift = XCAN_BTR_TS2_SHIFT,
> > .btr_sjw_shift = XCAN_BTR_SJW_SHIFT,
>
> Thanks for catching this, this line seemed to have been incorrectly removed by
> my 9e5f1b273e ("can: xilinx_can: add support for Xilinx CAN FD core").
>
> But:
>
> > @@ -1435,6 +1436,7 @@ static const struct xcan_devtype_data
> > xcan_zynq_data = { };
> >
> > static const struct xcan_devtype_data xcan_axi_data = {
> > + .flags = XCAN_FLAG_TXFEMP,
> > .bittiming_const = &xcan_bittiming_const,
> > .btr_ts2_shift = XCAN_BTR_TS2_SHIFT,
> > .btr_sjw_shift = XCAN_BTR_SJW_SHIFT,
>
>
> Are you sure this is right?
> In the documentation [1] there does not seem to be any TXFEMP interrupt, it
> would be interrupt bit 14 but AXI CAN 5.0 seems to only go up to 11.
>
> Or maybe it is undocumented or there is a newer version somewhere?
Sorry for the delay in the reply.
Agree TXFEMP interrupt feature is not supported by the Soft IP CAN.
Since this patch already got applied will send a separate patch to fix this.
Regards,
Kedar.
>
> [1]
> https://www.xilinx.com/support/documentation/ip_documentation/can/v5_0
> /pg096-can.pdf
>
> --
> Anssi Hannula / Bitwise Oy
> +358 503803997
