On the msm8998 mtp, the response to the baudrate change command is never
received.  On the Lenovo Miix 630, the response to the baudrate change
command is corrupted - "Frame reassembly failed (-84)".

Adding a 50ms delay before re-enabling flow to receive the baudrate change
command response from the wcn3990 addesses both issues, and allows
bluetooth to become functional.

Signed-off-by: Jeffrey Hugo <[email protected]>
---
 drivers/bluetooth/hci_qca.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index e3164c200eac..265fc60c3850 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1156,8 +1156,10 @@ static int qca_set_speed(struct hci_uart *hu, enum 
qca_speed_type speed_type)
                host_set_baudrate(hu, speed);
 
 error:
-               if (qca_is_wcn399x(soc_type))
+               if (qca_is_wcn399x(soc_type)) {
+                       msleep(50);
                        hci_uart_set_flow_control(hu, false);
+               }
 
                if (soc_type == QCA_WCN3990) {
                        /* Wait for the controller to send the vendor event
-- 
2.17.1

Reply via email to