On Sat, Oct 05, 2019 at 10:12:11PM +0530, Vidya Sagar wrote:
> Corrects the programming to provide REFCLK to the downstream device
> when there is no CLKREQ sideband signal routing present from root port
> to the endpont.
> 
> Signed-off-by: Vidya Sagar <vid...@nvidia.com>
> ---
>  drivers/pci/controller/dwc/pcie-tegra194.c | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)

Applied to pci/tegra, thanks.

Lorenzo

> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c 
> b/drivers/pci/controller/dwc/pcie-tegra194.c
> index f89f5acee72d..cbe95f0ea0ca 100644
> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
> @@ -40,8 +40,6 @@
>  #define APPL_PINMUX_CLKREQ_OVERRIDE          BIT(3)
>  #define APPL_PINMUX_CLK_OUTPUT_IN_OVERRIDE_EN        BIT(4)
>  #define APPL_PINMUX_CLK_OUTPUT_IN_OVERRIDE   BIT(5)
> -#define APPL_PINMUX_CLKREQ_OUT_OVRD_EN               BIT(9)
> -#define APPL_PINMUX_CLKREQ_OUT_OVRD          BIT(10)
>  
>  #define APPL_CTRL                            0x4
>  #define APPL_CTRL_SYS_PRE_DET_STATE          BIT(6)
> @@ -1193,8 +1191,8 @@ static int tegra_pcie_config_controller(struct 
> tegra_pcie_dw *pcie,
>  
>       if (!pcie->supports_clkreq) {
>               val = appl_readl(pcie, APPL_PINMUX);
> -             val |= APPL_PINMUX_CLKREQ_OUT_OVRD_EN;
> -             val |= APPL_PINMUX_CLKREQ_OUT_OVRD;
> +             val |= APPL_PINMUX_CLKREQ_OVERRIDE_EN;
> +             val &= ~APPL_PINMUX_CLKREQ_OVERRIDE;
>               appl_writel(pcie, val, APPL_PINMUX);
>       }
>  
> -- 
> 2.17.1
> 

Reply via email to