On 18/10/2019 16:03:04+0200, Kamel Bouhara wrote: > Split the Kizbox Mini boards into two board configuration, the > Kizboxmini Mother board and the Kizboxmini RailDIN board. > > Signed-off-by: Kamel Bouhara <[email protected]> > Signed-off-by: Kévin RAYMOND <[email protected]> > Signed-off-by: Mickael GARDET <[email protected]> > --- > arch/arm/boot/dts/Makefile | 2 + > arch/arm/boot/dts/at91-kizboxmini-mb.dts | 38 ++++ > arch/arm/boot/dts/at91-kizboxmini-rd.dts | 54 ++++++ > arch/arm/boot/dts/at91-kizboxmini_common.dtsi | 166 ++++++++++++++++++
This adds more than the subject says. > 4 files changed, 260 insertions(+) > create mode 100644 arch/arm/boot/dts/at91-kizboxmini-mb.dts > create mode 100644 arch/arm/boot/dts/at91-kizboxmini-rd.dts > create mode 100644 arch/arm/boot/dts/at91-kizboxmini_common.dtsi > Is arch/arm/boot/dts/at91-kizboxmini.dts still necessary after that? > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index c976b72a4c94..6b3a65f3f6f8 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -38,6 +38,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ > at91-ariettag25.dtb \ > at91-cosino_mega2560.dtb \ > at91-kizboxmini.dtb \ > + at91-kizboxmini-mb.dtb \ > + at91-kizboxmini-rd.dtb \ > at91-wb45n.dtb \ > at91sam9g15ek.dtb \ > at91sam9g25ek.dtb \ > diff --git a/arch/arm/boot/dts/at91-kizboxmini-mb.dts > b/arch/arm/boot/dts/at91-kizboxmini-mb.dts > new file mode 100644 > index 000000000000..52921f547dd6 > --- /dev/null > +++ b/arch/arm/boot/dts/at91-kizboxmini-mb.dts > @@ -0,0 +1,38 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2015-2018 Overkiz SAS > + * Author: Mickael Gardet <[email protected]> > + * Kévin Raymond <[email protected]> > + */ > +/dts-v1/; > +#include "at91-kizboxmini_common.dtsi" > + > +/ { > + model = "Overkiz Kizbox Mini Mother Board"; > + compatible = "overkiz,kizboxmini-mb", "atmel,at91sam9g25", > + "atmel,at91sam9x5", "atmel,at91sam9"; > + > + clocks { > + slow_xtal { > + clock-frequency = <32768>; > + }; > + }; > + > + pwm_leds { > + blue { > + label = "pwm:blue:user"; > + pwms = <&pwm0 2 10000000 0>; > + max-brightness = <255>; > + linux,default-trigger = "none"; The pwm is redefined here but is still left disabled from the common dtsi. > + }; > + }; > +}; > + > +&usb0 { > + num-ports = <2>; > +}; > + > +&rtc { > + status = "okay"; > +}; > + > diff --git a/arch/arm/boot/dts/at91-kizboxmini-rd.dts > b/arch/arm/boot/dts/at91-kizboxmini-rd.dts > new file mode 100644 > index 000000000000..1d2db8e16271 > --- /dev/null > +++ b/arch/arm/boot/dts/at91-kizboxmini-rd.dts > @@ -0,0 +1,54 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2015-2018 Overkiz SAS > + * Author: Mickael Gardet <[email protected]> > + * Kévin Raymond <[email protected]> > + */ > +/dts-v1/; > +#include "at91-kizboxmini_common.dtsi" > + > +/ { > + model = "Overkiz Kizbox Mini RailDIN"; > + compatible = "overkiz,kizboxmini-rd", "atmel,at91sam9g25", > + "atmel,at91sam9x5", "atmel,at91sam9"; > + > + clocks { > + slow_xtal { > + clock-frequency = <32768>; > + }; > + adc_op_clk { > + status = "okay"; > + }; > + }; > +}; > + > +&pinctrl { > + adc0 { > + pinctrl_adc0_ad5: adc0_ad5-0 { > + /* pull-up disable */ > + atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO > AT91_PINCTRL_NONE>; > + }; > + }; > +}; > + > +&usart0 { > + status = "disabled"; > +}; > + > +&rtc { > + status = "okay"; > +}; > + > +&leds { > + blue { > + status = "okay"; > + }; > +}; > + > +&adc0 { > + atmel,adc-vref = <2500>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_adc0_ad5>; > + atmel,adc-channels-used = <0x0020>; > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/at91-kizboxmini_common.dtsi > b/arch/arm/boot/dts/at91-kizboxmini_common.dtsi > new file mode 100644 > index 000000000000..2598b776a278 > --- /dev/null > +++ b/arch/arm/boot/dts/at91-kizboxmini_common.dtsi > @@ -0,0 +1,166 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board > + * > + * Copyright (C) 2014-2018 Overkiz SAS > + * Author: Antoine Aubert <[email protected]> > + * Gaël Portay <[email protected]> > + * Kévin Raymond <[email protected]> > + * Dorian Rocipon <[email protected]> > + */ > +#include "at91sam9g25.dtsi" > + > +/ { > + chosen { > + bootargs = "ubi.mtd=ubi"; > + stdout-path = &dbgu; > + }; > + > + memory { > + reg = <0x20000000 0x8000000>; > + }; > + > + clocks { > + main_xtal { > + clock-frequency = <12000000>; > + }; > + > + adc_op_clk { > + status = "disabled"; > + }; > + }; > + > + gpio_keys { > + compatible = "gpio-keys"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + prog { > + label = "PB_PROG"; > + gpios = <&pioC 17 GPIO_ACTIVE_LOW>; > + linux,code = <0x102>; > + wakeup-source; > + }; > + > + reset { > + label = "PB_RST"; > + gpios = <&pioC 16 GPIO_ACTIVE_LOW>; > + linux,code = <0x100>; > + wakeup-source; > + }; > + }; > + > + leds: pwm_leds { > + compatible = "pwm-leds"; > + > + blue { > + label = "pwm:blue:user"; > + pwms = <&pwm0 2 10000000 0>; > + max-brightness = <255>; > + linux,default-trigger = "none"; > + status = "disabled"; > + }; > + > + green { > + label = "pwm:green:user"; > + pwms = <&pwm0 0 10000000 0>; > + max-brightness = <255>; > + linux,default-trigger = "default-on"; > + }; > + > + red { > + label = "pwm:red:user"; > + pwms = <&pwm0 1 10000000 0>; > + max-brightness = <255>; > + linux,default-trigger = "default-on"; > + }; > + }; > +}; > + > +&usart0 { > + atmel,use-dma-rx; > + atmel,use-dma-tx; > + status = "okay"; > +}; > + > +&macb0 { > + phy-mode = "rmii"; > + status = "okay"; > +}; > + > +&pwm0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm0_pwm0_1 > + &pinctrl_pwm0_pwm1_1 > + &pinctrl_pwm0_pwm2_1>; > + status = "okay"; > +}; > + > +&dbgu { > + status = "okay"; > +}; > + > +&watchdog { > + status = "okay"; > +}; > + > +&adc0 { > + status = "disabled"; > +}; > + > +&rtc { > + status = "disabled"; > +}; > + > +&ebi { > + pinctrl-0 = <&pinctrl_ebi_addr_nand > + &pinctrl_ebi_data_0_7>; > + pinctrl-names = "default"; > + status = "okay"; > +}; > + > +&nand_controller { > + status = "okay"; > + pinctrl-0 = <&pinctrl_nand_oe_we > + &pinctrl_nand_cs > + &pinctrl_nand_rb>; > + pinctrl-names = "default"; > + > + nand@3 { > + reg = <0x3 0x0 0x800000>; > + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; > + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; > + nand-bus-width = <8>; > + nand-ecc-mode = "hw"; > + nand-ecc-strength = <4>; > + nand-ecc-step-size = <512>; > + nand-on-flash-bbt; > + label = "atmel_nand"; > + > + partitions { > + compatible = "fixed-partitions"; > + #address-cells = <1>; > + #size-cells = <1>; > + > + bootstrap@0 { > + label = "bootstrap"; > + reg = <0x0 0x20000>; > + }; > + > + ubi@20000 { > + label = "ubi"; > + reg = <0x20000 0x7fe0000>; > + }; > + }; > + }; > +}; > + > +&usb0 { > + num-ports = <1>; > + status = "okay"; > +}; > + > +&usb1 { > + status = "okay"; > +}; > + > -- > 2.23.0 > -- Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
