* Benoit Parrot <bpar...@ti.com> [191018 15:46]:
> Add device nodes for CSI2 camera board OV5640.
> Add the CAL port nodes with the necessary linkage to the ov5640 nodes.
>
> Signed-off-by: Benoit Parrot <bpar...@ti.com>
> ---
> arch/arm/boot/dts/dra72-evm-common.dtsi | 35 +++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi
> b/arch/arm/boot/dts/dra72-evm-common.dtsi
> index 8641a3d7d8ad..e4c01a67f6de 100644
> --- a/arch/arm/boot/dts/dra72-evm-common.dtsi
> +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
> @@ -187,6 +187,12 @@
> gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>;
> enable-active-high;
> };
> +
> + clk_ov5640_fixed: clk_ov5640_fixed {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <24000000>;
> + };
> };
The clock node name should be generic and not use
undescores. If there is a hidden dependency to the
clock node name here, it should be mentioned in the
patch for the non-standard use.
Regards,
Tony
