On Tue, 2007-10-02 at 14:44 +1000, Benjamin Herrenschmidt wrote:
> On Mon, 2007-10-01 at 20:23 -0700, Philip Langdale wrote:
> > Thanks to Matt Domsch and Rezwanul Kabir at Dell, we know how to disable the
> > MMC controller on the multi-function Ricoh R5C832. The MMC controller needs
> > to be disabled or it will steal MMC cards from the SD controller where they
> > would otherwise be supported by the Linux SDHCI driver.
> 
> Why can't that be a quirk instead ?

That is, a global quirk or a quirk in the SDHCI driver...

> > Signed-off-by: Philipl Langdale <[EMAIL PROTECTED]>
> > 
> > --- linux-2.6.22/drivers/mmc/host/Kconfig   2007-07-08 16:32:17.000000000 
> > -0700
> > +++ linux-ricoh/drivers/mmc/host/Kconfig    2007-09-15 12:32:10.000000000 
> > -0700
> > @@ -35,6 +35,23 @@
> > 
> >       If unsure, say N.
> > 
> > +config MMC_RICOH_MMC
> > +   tristate "Ricoh MMC Controller Disabler  (EXPERIMENTAL)"
> > +   depends on PCI && EXPERIMENTAL && MMC_SDHCI
> > +   help
> > +     This selects the disabler for the Ricoh MMC Controller. This
> > +     proprietary controller is unnecessary because the SDHCI driver
> > +     supports MMC cards on the SD controller, but if it is not
> > +     disabled, it will steal the MMC cards away - rendering them
> > +     useless. It is safe to select this driver even if you don't
> > +     have a Ricoh based card reader.
> > +
> > +
> > +     To compile this driver as a module, choose M here:
> > +     the module will be called ricoh_mmc.
> > +
> > +     If unsure, say Y.
> > +
> >  config MMC_OMAP
> >     tristate "TI OMAP Multimedia Card Interface support"
> >     depends on ARCH_OMAP
> > --- linux-2.6.22/drivers/mmc/host/Makefile  2007-07-08 16:32:17.000000000 
> > -0700
> > +++ linux-ricoh/drivers/mmc/host/Makefile   2007-09-15 12:28:49.000000000 
> > -0700
> > @@ -15,4 +15,5 @@
> >  obj-$(CONFIG_MMC_OMAP)             += omap.o
> >  obj-$(CONFIG_MMC_AT91)             += at91_mci.o
> >  obj-$(CONFIG_MMC_TIFM_SD)  += tifm_sd.o
> > +obj-$(CONFIG_MMC_RICOH_MMC)        += ricoh_mmc.o
> > 
> > --- linux-2.6.22/drivers/mmc/host/ricoh_mmc.c       1969-12-31 
> > 16:00:00.000000000 -0800
> > +++ linux-ricoh/drivers/mmc/host/ricoh_mmc.c        2007-09-15 
> > 12:29:05.000000000 -0700
> > @@ -0,0 +1,156 @@
> > +/*
> > + *  ricoh_mmc.c - Dummy driver to disable the Rioch MMC controller.
> > + *
> > + *  Copyright (C) 2007 Philip Langdale, All Rights Reserved.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or (at
> > + * your option) any later version.
> > + */
> > +
> > +/*
> > + * This is a conceptually ridiculous driver, but it is required by the way
> > + * the Ricoh multi-function R5C832 works. This chip implements firewire
> > + * and four different memory card controllers. Two of those controllers are
> > + * an SDHCI controller and a proprietary MMC controller. The linux SDHCI
> > + * driver supports MMC cards but the chip detects MMC cards in hardware
> > + * and directs them to the MMC controller - so the SDHCI driver never sees
> > + * them. To get around this, we must disable the useless MMC controller.
> > + * At that point, the SDHCI controller will start seeing them. As a bonus,
> > + * a detection event occurs immediately, even if the MMC card is already
> > + * in the reader.
> > + *
> > + * The relevant registers live on the firewire function, so this is 
> > unavoidably
> > + * ugly. Such is life.
> > + */
> > +
> > +#include <linux/pci.h>
> > +
> > +#define DRIVER_NAME "ricoh-mmc"
> > +
> > +#define DBG(f, x...) \
> > +   pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
> > +
> > +static const struct pci_device_id pci_ids[] __devinitdata = {
> > +   {
> > +           .vendor         = PCI_VENDOR_ID_RICOH,
> > +           .device         = PCI_DEVICE_ID_RICOH_R5C843,
> > +           .subvendor      = PCI_ANY_ID,
> > +           .subdevice      = PCI_ANY_ID,
> > +   },
> > +   { /* end: all zeroes */ },
> > +};
> > +
> > +MODULE_DEVICE_TABLE(pci, pci_ids);
> > +
> > +static int __devinit ricoh_mmc_probe(struct pci_dev *pdev,
> > +                                const struct pci_device_id *ent)
> > +{
> > +   u8 rev;
> > +
> > +   struct pci_dev *fw_dev = NULL;
> > +
> > +   BUG_ON(pdev == NULL);
> > +   BUG_ON(ent == NULL);
> > +
> > +   pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev);
> > +
> > +   printk(KERN_INFO DRIVER_NAME
> > +           ": Ricoh MMC controller found at %s [%04x:%04x] (rev %x)\n",
> > +           pci_name(pdev), (int)pdev->vendor, (int)pdev->device,
> > +           (int)rev);
> > +
> > +   while ((fw_dev = pci_get_device(PCI_VENDOR_ID_RICOH, 
> > PCI_DEVICE_ID_RICOH_R5C832, fw_dev))) {
> > +           if (PCI_SLOT(pdev->devfn) == PCI_SLOT(fw_dev->devfn) &&
> > +               pdev->bus == fw_dev->bus) {
> > +                   u8 write_enable;
> > +                   u8 disable;
> > +
> > +                   pci_read_config_byte(fw_dev, 0xCB, &disable);
> > +                   if (disable & 0x02) {
> > +                           printk(KERN_INFO DRIVER_NAME
> > +                                  ": Controller already disabled. Nothing 
> > to do.\n");
> > +                           return -ENODEV;
> > +                   }
> > +
> > +                   pci_read_config_byte(fw_dev, 0xCA, &write_enable);
> > +                   pci_write_config_byte(fw_dev, 0xCA, 0x57);
> > +                   pci_write_config_byte(fw_dev, 0xCB, disable | 0x02);
> > +                   pci_write_config_byte(fw_dev, 0xCA, write_enable);
> > +
> > +                   pci_set_drvdata(pdev, fw_dev);
> > +
> > +                   printk(KERN_INFO DRIVER_NAME
> > +                          ": Controller is now disabled.\n");
> > +
> > +                   break;
> > +           }
> > +   }
> > +
> > +   if (pci_get_drvdata(pdev) == NULL) {
> > +           printk(KERN_WARNING DRIVER_NAME
> > +                  ": Main firewire function not found. Cannot disable 
> > controller.\n");
> > +           return -ENODEV;
> > +   }
> > +
> > +   return 0;
> > +}
> > +
> > +static void __devexit ricoh_mmc_remove(struct pci_dev *pdev)
> > +{
> > +   u8 write_enable;
> > +   u8 disable;
> > +   struct pci_dev *fw_dev = NULL;
> > +
> > +   fw_dev = pci_get_drvdata(pdev);
> > +   BUG_ON(fw_dev == NULL);
> > +
> > +   pci_read_config_byte(fw_dev, 0xCA, &write_enable);
> > +   pci_read_config_byte(fw_dev, 0xCB, &disable);
> > +   pci_write_config_byte(fw_dev, 0xCA, 0x57);
> > +   pci_write_config_byte(fw_dev, 0xCB, disable & ~0x02);
> > +   pci_write_config_byte(fw_dev, 0xCA, write_enable);
> > +
> > +   printk(KERN_INFO DRIVER_NAME
> > +          ": Controller is now re-enabled.\n");
> > +
> > +   pci_set_drvdata(pdev, NULL);
> > +}
> > +
> > +static struct pci_driver ricoh_mmc_driver = {
> > +   .name =         DRIVER_NAME,
> > +   .id_table =     pci_ids,
> > +   .probe =        ricoh_mmc_probe,
> > +   .remove =       __devexit_p(ricoh_mmc_remove),
> > +};
> > +
> > +/*****************************************************************************\
> > + *                                                                         
> >   *
> > + * Driver init/exit                                                        
> >   *
> > + *                                                                         
> >   *
> > +\*****************************************************************************/
> > +
> > +static int __init ricoh_mmc_drv_init(void)
> > +{
> > +   printk(KERN_INFO DRIVER_NAME
> > +           ": Ricoh MMC Controller disabling driver\n");
> > +   printk(KERN_INFO DRIVER_NAME ": Copyright(c) Philip Langdale\n");
> > +
> > +   return pci_register_driver(&ricoh_mmc_driver);
> > +}
> > +
> > +static void __exit ricoh_mmc_drv_exit(void)
> > +{
> > +   DBG("Exiting\n");
> > +
> > +   pci_unregister_driver(&ricoh_mmc_driver);
> > +}
> > +
> > +module_init(ricoh_mmc_drv_init);
> > +module_exit(ricoh_mmc_drv_exit);
> > +
> > +MODULE_AUTHOR("Philip Langdale <[EMAIL PROTECTED]>");
> > +MODULE_DESCRIPTION("Ricoh MMC Controller disabling driver");
> > +MODULE_LICENSE("GPL");
> > +
> > --- linux-2.6.22/include/linux/pci_ids.h    2007-09-02 00:14:25.000000000 
> > -0700
> > +++ linux-ricoh/include/linux/pci_ids.h     2007-09-15 12:27:36.000000000 
> > -0700
> > @@ -1485,6 +1485,8 @@
> >  #define PCI_DEVICE_ID_RICOH_RL5C476        0x0476
> >  #define PCI_DEVICE_ID_RICOH_RL5C478        0x0478
> >  #define PCI_DEVICE_ID_RICOH_R5C822 0x0822
> > +#define PCI_DEVICE_ID_RICOH_R5C832 0x0832
> > +#define PCI_DEVICE_ID_RICOH_R5C843 0x0843
> > 
> >  #define PCI_VENDOR_ID_DLINK                0x1186
> >  #define PCI_DEVICE_ID_DLINK_DGE510T        0x4c00
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to [EMAIL PROTECTED]
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at  http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to