Thanks Rob!

On Tue, 5 May 2020 at 17:49, Rob Herring <r...@kernel.org> wrote:
>
> On Tue,  5 May 2020 12:01:29 +0200, Robert Foss wrote:
> > From: Dongchun Zhu <dongchun....@mediatek.com>
> >
> > This patch adds documentation of device tree in YAML schema for the
> > OV8856 CMOS image sensor.
> >
> > Signed-off-by: Dongchun Zhu <dongchun....@mediatek.com>
> > Signed-off-by: Robert Foss <robert.f...@linaro.org>
> > Reviewed-by: Maxime Ripard <mrip...@kernel.org>
> > ---
> >
> > - Changes since v9:
> >   * Remove remote-endpoint property
> >   * Marco: Make port property required again
> >   * Sakari: Remove Ben as a maintainer
> >   * Sakari: Replace data-lanes with const items
> >   * Sakari: Remove clock-lanes property
> >   * Sakari & Rob Herring: Change type of link-frequency
> >     work around dt-schema bug
> >
> > - Changes since v8:
> >   * Maxime: Added r-b
> >
> > - Changes since v7:
> >   * Marco: Make 'port' property optional
> >   * Maxime & Sakari: Add 'link-frequencies' property to dt binding
> >   * robher: Improve description for 'port' property
> >
> > - Changes since v6:
> >   * Marco: remove qcom specifics from DT example
> >
> > - Changes since v5:
> >   * Add assigned-clocks and assigned-clock-rates
> >   * robher: dt-schema errors
> >
> > - Changes since v4:
> >   * Fabio: Change reset-gpio to GPIO_ACTIVE_LOW, explain in description
> >   * Add clock-lanes property to example
> >   * robher: Fix syntax error in devicetree example
> >
> > - Changes since v3:
> >   * robher: Fix syntax error
> >   * robher: Removed maxItems
> >   * Fixes yaml 'make dt-binding-check' errors
> >
> > - Changes since v2:
> >
> > - Changes since v1:
> >   Fixes comments from Sakari, Tomasz
> >   * Add clock-frequency and link-frequencies in DT
> >
> >  .../devicetree/bindings/media/i2c/ov8856.yaml | 142 ++++++++++++++++++
> >  MAINTAINERS                                   |   1 +
> >  2 files changed, 143 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/i2c/ov8856.yaml
> >
>
> Reviewed-by: Rob Herring <r...@kernel.org>

Reply via email to