On 2020-04-22 17:37, Bjorn Andersson wrote:
In all but the very special case of a system with _only_ glink_rpm,
GLINK is dependent on glink_ssr, so move it to rpmsg and combine it
with
qcom_glink_native in the new qcom_glink kernel module.
Signed-off-by: Bjorn Andersson <bjorn.anders...@linaro.org>
---
Acked-by: Rishabh Bhatnagar <risha...@codeaurora.org>
drivers/rpmsg/Kconfig | 6 +++---
drivers/rpmsg/Makefile | 3 ++-
drivers/{soc/qcom/glink_ssr.c => rpmsg/qcom_glink_ssr.c} | 4 ----
drivers/soc/qcom/Kconfig | 9 ---------
drivers/soc/qcom/Makefile | 1 -
include/linux/rpmsg/qcom_glink.h | 7 +------
6 files changed, 6 insertions(+), 24 deletions(-)
rename drivers/{soc/qcom/glink_ssr.c => rpmsg/qcom_glink_ssr.c} (97%)
diff --git a/drivers/rpmsg/Kconfig b/drivers/rpmsg/Kconfig
index a9108ff563dc..f96716893c2a 100644
--- a/drivers/rpmsg/Kconfig
+++ b/drivers/rpmsg/Kconfig
@@ -24,13 +24,13 @@ config RPMSG_MTK_SCP
remote processors in MediaTek platforms.
This use IPI and IPC to communicate with remote processors.
-config RPMSG_QCOM_GLINK_NATIVE
+config RPMSG_QCOM_GLINK
tristate
select RPMSG
config RPMSG_QCOM_GLINK_RPM
tristate "Qualcomm RPM Glink driver"
- select RPMSG_QCOM_GLINK_NATIVE
+ select RPMSG_QCOM_GLINK
depends on HAS_IOMEM
depends on MAILBOX
help
@@ -40,7 +40,7 @@ config RPMSG_QCOM_GLINK_RPM
config RPMSG_QCOM_GLINK_SMEM
tristate "Qualcomm SMEM Glink driver"
- select RPMSG_QCOM_GLINK_NATIVE
+ select RPMSG_QCOM_GLINK
depends on MAILBOX
depends on QCOM_SMEM
help
diff --git a/drivers/rpmsg/Makefile b/drivers/rpmsg/Makefile
index ae92a7fb08f6..ffe932ef6050 100644
--- a/drivers/rpmsg/Makefile
+++ b/drivers/rpmsg/Makefile
@@ -2,8 +2,9 @@
obj-$(CONFIG_RPMSG) += rpmsg_core.o
obj-$(CONFIG_RPMSG_CHAR) += rpmsg_char.o
obj-$(CONFIG_RPMSG_MTK_SCP) += mtk_rpmsg.o
+qcom_glink-objs := qcom_glink_native.o qcom_glink_ssr.o
+obj-$(CONFIG_RPMSG_QCOM_GLINK) += qcom_glink.o
obj-$(CONFIG_RPMSG_QCOM_GLINK_RPM) += qcom_glink_rpm.o
-obj-$(CONFIG_RPMSG_QCOM_GLINK_NATIVE) += qcom_glink_native.o
obj-$(CONFIG_RPMSG_QCOM_GLINK_SMEM) += qcom_glink_smem.o
obj-$(CONFIG_RPMSG_QCOM_SMD) += qcom_smd.o
obj-$(CONFIG_RPMSG_VIRTIO) += virtio_rpmsg_bus.o
diff --git a/drivers/soc/qcom/glink_ssr.c
b/drivers/rpmsg/qcom_glink_ssr.c
similarity index 97%
rename from drivers/soc/qcom/glink_ssr.c
rename to drivers/rpmsg/qcom_glink_ssr.c
index 847d79c935f1..dcd1ce616974 100644
--- a/drivers/soc/qcom/glink_ssr.c
+++ b/drivers/rpmsg/qcom_glink_ssr.c
@@ -164,7 +164,3 @@ static struct rpmsg_driver qcom_glink_ssr_driver =
{
},
};
module_rpmsg_driver(qcom_glink_ssr_driver);
-
-MODULE_ALIAS("rpmsg:glink_ssr");
-MODULE_DESCRIPTION("Qualcomm GLINK SSR notifier");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 19332ea40234..5140bd82f1be 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -35,15 +35,6 @@ config QCOM_GENI_SE
driver is also used to manage the common aspects of multiple Serial
Engines present in the QUP.
-config QCOM_GLINK_SSR
- tristate "Qualcomm Glink SSR driver"
- depends on RPMSG
- depends on QCOM_RPROC_COMMON
- help
- Say y here to enable GLINK SSR support. The GLINK SSR driver
- implements the SSR protocol for notifying the remote processor
about
- neighboring subsystems going up or down.
-
config QCOM_GSBI
tristate "QCOM General Serial Bus Interface"
depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 5d6b83dc58e8..e9cacc9ad401 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -3,7 +3,6 @@ CFLAGS_rpmh-rsc.o := -I$(src)
obj-$(CONFIG_QCOM_AOSS_QMP) += qcom_aoss.o
obj-$(CONFIG_QCOM_GENI_SE) += qcom-geni-se.o
obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
-obj-$(CONFIG_QCOM_GLINK_SSR) += glink_ssr.o
obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
obj-$(CONFIG_QCOM_MDT_LOADER) += mdt_loader.o
obj-$(CONFIG_QCOM_OCMEM) += ocmem.o
diff --git a/include/linux/rpmsg/qcom_glink.h
b/include/linux/rpmsg/qcom_glink.h
index 09daa0acde2c..daded9fddf36 100644
--- a/include/linux/rpmsg/qcom_glink.h
+++ b/include/linux/rpmsg/qcom_glink.h
@@ -12,6 +12,7 @@ struct qcom_glink;
struct qcom_glink *qcom_glink_smem_register(struct device *parent,
struct device_node *node);
void qcom_glink_smem_unregister(struct qcom_glink *glink);
+void qcom_glink_ssr_notify(const char *ssr_name);
#else
@@ -23,12 +24,6 @@ qcom_glink_smem_register(struct device *parent,
}
static inline void qcom_glink_smem_unregister(struct qcom_glink
*glink) {}
-
-#endif
-
-#if IS_ENABLED(CONFIG_RPMSG_QCOM_GLINK_SSR)
-void qcom_glink_ssr_notify(const char *ssr_name);
-#else
static inline void qcom_glink_ssr_notify(const char *ssr_name) {}
#endif
