On some platforms IO-memory might require to use a proper load/store
instructions (like Baikal-T1 IO-memory). To fix the cps-vec UART debug
printout let's add the CONFIG_CPS_NS16550_WIDTH config to determine which
instructions lb/sb, lh/sh or lw/sw are required for MMIO operations.
Signed-off-by: Serge Semin <sergey.se...@baikalelectronics.ru>
Cc: Alexey Malahov <alexey.mala...@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbog...@alpha.franken.de>
Cc: Paul Burton <paulbur...@kernel.org>
Cc: Ralf Baechle <r...@linux-mips.org>
Cc: Arnd Bergmann <a...@arndb.de>
Cc: Rob Herring <robh...@kernel.org>
Cc: devicet...@vger.kernel.org
---
There might be another problem in cps-vec-ns16550.S connected with the
difference in CPU/devices endinanness on some platforms. But there is
no such for Baikal-T1 SoC.
Changelog v3:
- Introduce new CPS_NS16550_WIDTH to determine the IO access instrctions
instead of using the CPS_NS16550_OFFSET config.
---
arch/mips/Kconfig.debug | 10 ++++++++++
arch/mips/kernel/cps-vec-ns16550.S | 18 ++++++++++++++++--
2 files changed, 26 insertions(+), 2 deletions(-)
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 93a2974d2ab7..7a8d94cdd493 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -148,4 +148,14 @@ config MIPS_CPS_NS16550_SHIFT
form their addresses. That is, log base 2 of the span between
adjacent ns16550 registers in the system.
+config MIPS_CPS_NS16550_WIDTH
+ int "UART Register Width"
+ default 1
+ help
+ ns16550 registers width. UART registers IO access methods will be
+ selected in accordance with this parameter. By setting it to 1, 2 or
+ 4 UART registers will be accessed by means of lb/sb, lh/sh or lw/sw
+ instructions respectively. Any value not from that set activates
+ lb/sb instructions.
+
endif # MIPS_CPS_NS16550_BOOL
diff --git a/arch/mips/kernel/cps-vec-ns16550.S
b/arch/mips/kernel/cps-vec-ns16550.S
index d5a67b4ce9f6..30725e1df987 100644
--- a/arch/mips/kernel/cps-vec-ns16550.S
+++ b/arch/mips/kernel/cps-vec-ns16550.S
@@ -14,16 +14,30 @@
#define UART_TX_OFS (UART_TX << CONFIG_MIPS_CPS_NS16550_SHIFT)
#define UART_LSR_OFS (UART_LSR << CONFIG_MIPS_CPS_NS16550_SHIFT)
+#if CONFIG_MIPS_CPS_NS16550_WIDTH == 1
+# define UART_L lb
+# define UART_S sb
+#elif CONFIG_MIPS_CPS_NS16550_WIDTH == 2
+# define UART_L lh
+# define UART_S sh
+#elif CONFIG_MIPS_CPS_NS16550_WIDTH == 4
+# define UART_L lw
+# define UART_S sw
+#else
+# define UART_L lb
+# define UART_S sb
+#endif
+
/**
* _mips_cps_putc() - write a character to the UART
* @a0: ASCII character to write
* @t9: UART base address
*/
LEAF(_mips_cps_putc)
-1: lw t0, UART_LSR_OFS(t9)
+1: UART_L t0, UART_LSR_OFS(t9)
andi t0, t0, UART_LSR_TEMT
beqz t0, 1b
- sb a0, UART_TX_OFS(t9)
+ UART_S a0, UART_TX_OFS(t9)
jr ra
END(_mips_cps_putc)
--
2.25.1
