[PATCH v2 6/9] ARM: dts: sunxi: a83t: Move wakeup-capable IRQs to r_intc

[Samuel Holland]

All IRQs that can be used to wake up the system must be routed through
r_intc, so they are visible to firmware while the system is suspended.

For the A83T, r_intc IRQ numbers are offset by 32 from the GIC IRQ
numbers.

Signed-off-by: Samuel Holland <sam...@sholland.org>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi 
b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 655404d6d3a3..fcfc573eb96d 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -1130,7 +1130,8 @@ r_cir: ir@1f02000 {
                        clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
                        clock-names = "apb", "ir";
                        resets = <&r_ccu RST_APB0_IR>;
-                       interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-parent = <&r_intc>;
+                       interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
                        reg = <0x01f02000 0x400>;
                        pinctrl-names = "default";
                        pinctrl-0 = <&r_cir_pin>;
@@ -1140,14 +1141,16 @@ r_cir: ir@1f02000 {
                r_lradc: lradc@1f03c00 {
                        compatible = "allwinner,sun8i-a83t-r-lradc";
                        reg = <0x01f03c00 0x100>;
-                       interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-parent = <&r_intc>;
+                       interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
                        status = "disabled";
                };
 
                r_pio: pinctrl@1f02c00 {
                        compatible = "allwinner,sun8i-a83t-r-pinctrl";
                        reg = <0x01f02c00 0x400>;
-                       interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-parent = <&r_intc>;
+                       interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
                                 <&osc16Md512>;
                        clock-names = "apb", "hosc", "losc";
-- 
2.24.1