On 30. 05. 20 14:06, Jan Kiszka wrote: > On 04.05.20 16:27, Michal Simek wrote: >> From: Shubhrajyoti Datta <shubhrajyoti.da...@xilinx.com> >> >> When serial console has been assigned to ttyPS1 (which is serial1 alias) >> console index is not updated property and pointing to index -1 (statically >> initialized) which ends up in situation where nothing has been printed on >> the port. >> >> The commit 18cc7ac8a28e ("Revert "serial: uartps: Register own uart console >> and driver structures"") didn't contain this line which was removed by >> accident. >> >> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.da...@xilinx.com> >> Cc: stable <sta...@vger.kernel.org> >> Signed-off-by: Michal Simek <michal.si...@xilinx.com> >> --- >> >> Changes in v2: >> - Do better commit description >> - Origin subject was "tty: xilinx_uartps: Add the id to the console" >> >> Greg: Would be good if you can take this patch to 5.7 and also to stable >> trees. >> >> --- >> drivers/tty/serial/xilinx_uartps.c | 1 + >> 1 file changed, 1 insertion(+) >> >> diff --git a/drivers/tty/serial/xilinx_uartps.c >> b/drivers/tty/serial/xilinx_uartps.c >> index 672cfa075e28..b9d672af8b65 100644 >> --- a/drivers/tty/serial/xilinx_uartps.c >> +++ b/drivers/tty/serial/xilinx_uartps.c >> @@ -1465,6 +1465,7 @@ static int cdns_uart_probe(struct platform_device >> *pdev) >> cdns_uart_uart_driver.nr = CDNS_UART_NR_PORTS; >> #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE >> cdns_uart_uart_driver.cons = &cdns_uart_console; >> + cdns_uart_console.index = id; >> #endif >> >> rc = uart_register_driver(&cdns_uart_uart_driver); >> > > This breaks the ultra96-rev1 which uses uart1 as serial0 (and > stdout-path = "serial0:115200n8"). Reverting this commit gives > > [ 0.024344] Serial: AMBA PL011 UART driver > [ 0.028010] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 19, > base_baud = 6250000) is a xuartps > [ 0.028172] serial serial0: tty port ttyPS1 registered > [ 0.028579] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 20, > base_baud = 6250000) is a xuartps > [ 0.557477] printk: console [ttyPS0] enabled > > again. Affects stable as well (seen first in 5.4).
Will take a look at this. Just give me some time. M