Get from the DT the syncon to probe the state of the remote processor and the location of the resource table.
Mainly based on the work published by Arnaud Pouliquen [1]. [1]. https://patchwork.kernel.org/project/linux-remoteproc/list/?series=239877 Signed-off-by: Mathieu Poirier <mathieu.poir...@linaro.org> Reviewed-by: Loic Pallardy <loic.palla...@st.com> Reviewed-by: Bjorn Andersson <bjorn.anders...@linaro.org> --- drivers/remoteproc/stm32_rproc.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c index 3e3b199a02c1..80fd8fd831da 100644 --- a/drivers/remoteproc/stm32_rproc.c +++ b/drivers/remoteproc/stm32_rproc.c @@ -70,6 +70,8 @@ struct stm32_rproc { struct reset_control *rst; struct stm32_syscon hold_boot; struct stm32_syscon pdds; + struct stm32_syscon m4_state; + struct stm32_syscon rsctbl; int wdg_irq; u32 nb_rmems; struct stm32_rproc_mem *rmems; @@ -606,6 +608,30 @@ static int stm32_rproc_parse_dt(struct platform_device *pdev, *auto_boot = of_property_read_bool(np, "st,auto-boot"); + /* + * See if we can check the M4 status, i.e if it was started + * from the boot loader or not. + */ + err = stm32_rproc_get_syscon(np, "st,syscfg-m4-state", + &ddata->m4_state); + if (err) { + /* remember this */ + ddata->m4_state.map = NULL; + /* no coprocessor state syscon (optional) */ + dev_warn(dev, "m4 state not supported\n"); + + /* no need to go further */ + return 0; + } + + /* See if we can get the resource table */ + err = stm32_rproc_get_syscon(np, "st,syscfg-rsc-tbl", + &ddata->rsctbl); + if (err) { + /* no rsc table syscon (optional) */ + dev_warn(dev, "rsc tbl syscon not supported\n"); + } + return 0; } -- 2.20.1