Some regulators might need to verify that they have indeed been enabled
after the enable() call is made and enable_time delay has passed.
This is implemented by repeatedly checking is_enabled() upto
poll_enabled_time, waiting for the already calculated enable delay in
each iteration.
Signed-off-by: Sumit Semwal <sumit.sem...@linaro.org>
--
v2: Address review comments, including swapping enable_time and
poll_enabled_time.
---
drivers/regulator/core.c | 58 +++++++++++++++++++++++++++++++-
include/linux/regulator/driver.h | 5 +++
2 files changed, 62 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 7486f6e4e613..d9ab888da95f 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2347,6 +2347,32 @@ static void _regulator_enable_delay(unsigned int delay)
udelay(us);
}
+/* _regulator_check_status_enabled
+ *
+ * returns:
+ * 1 if status shows regulator is in enabled state
+ * 0 if not enabled state
+ * else, error value as received from ops->get_status()
+ */
+static inline int _regulator_check_status_enabled(struct regulator_dev *rdev)
+{
+ int ret = rdev->desc->ops->get_status(rdev);
+
+ if (ret < 0) {
+ rdev_info(rdev, "get_status returned error: %d\n", ret);
+ return ret;
+ }
+
+ switch (ret) {
+ case REGULATOR_STATUS_OFF:
+ case REGULATOR_STATUS_ERROR:
+ case REGULATOR_STATUS_UNDEFINED:
+ return 0;
+ default:
+ return 1;
+ }
+}
+
static int _regulator_do_enable(struct regulator_dev *rdev)
{
int ret, delay;
@@ -2407,7 +2433,37 @@ static int _regulator_do_enable(struct regulator_dev
*rdev)
* together. */
trace_regulator_enable_delay(rdev_get_name(rdev));
- _regulator_enable_delay(delay);
+ /* If poll_enabled_time is set, poll upto the delay calculated
+ * above, delaying poll_enabled_time uS to check if the regulator
+ * actually got enabled.
+ * If the regulator isn't enabled after enable_delay has
+ * expired, return -ETIMEDOUT.
+ */
+ if (rdev->desc->poll_enabled_time) {
+ unsigned int time_remaining = delay;
+
+ while (time_remaining > 0) {
+ _regulator_enable_delay(rdev->desc->poll_enabled_time);
+
+ if (rdev->desc->ops->get_status) {
+ ret = _regulator_check_status_enabled(rdev);
+ if (ret < 0)
+ return ret;
+ else if (ret)
+ break;
+ } else if (rdev->desc->ops->is_enabled(rdev))
+ break;
+
+ time_remaining -= rdev->desc->poll_enabled_time;
+ }
+
+ if (time_remaining <= 0) {
+ rdev_err(rdev, "Enabled check failed.\n");
+ return -ETIMEDOUT;
+ }
+ } else {
+ _regulator_enable_delay(delay);
+ }
trace_regulator_enable_complete(rdev_get_name(rdev));
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 29d920516e0b..bb50e943010f 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -322,6 +322,9 @@ enum regulator_type {
* @enable_time: Time taken for initial enable of regulator (in uS).
* @off_on_delay: guard time (in uS), before re-enabling a regulator
*
+ * @poll_enabled_time: Maximum time (in uS) to poll if the regulator is
+ * actually enabled, after enable() call
+ *
* @of_map_mode: Maps a hardware mode defined in a DeviceTree to a standard
mode
*/
struct regulator_desc {
@@ -389,6 +392,8 @@ struct regulator_desc {
unsigned int off_on_delay;
+ unsigned int poll_enabled_time;
+
unsigned int (*of_map_mode)(unsigned int mode);
};
--
2.26.2
