Add the multicolor brightness call back to support the multicolor framework. This call back allows setting brightness on grouped channels in a single function.
Acked-by: Pavel Machek <pa...@ucw.cz> Acked-by: Jacek Anaszewski <jacek.anaszew...@gmail.com> Signed-off-by: Dan Murphy <dmur...@ti.com> --- drivers/leds/Kconfig | 1 + drivers/leds/leds-lp5523.c | 20 ++++++++++++++++++++ 2 files changed, 21 insertions(+) diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index c127a931e250..8b28f73c810c 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -408,6 +408,7 @@ config LEDS_LP5521 config LEDS_LP5523 tristate "LED Support for TI/National LP5523/55231 LED driver chip" depends on LEDS_CLASS && I2C + depends on LEDS_CLASS_MULTI_COLOR || !LEDS_CLASS_MULTI_COLOR select LEDS_LP55XX_COMMON help If you say yes here you get support for TI/National Semiconductor diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c index b076c16df9ab..9776dc72a764 100644 --- a/drivers/leds/leds-lp5523.c +++ b/drivers/leds/leds-lp5523.c @@ -791,6 +791,25 @@ static ssize_t store_master_fader_leds(struct device *dev, return ret; } +static int lp5523_multicolor_brightness(struct lp55xx_led *led) +{ + struct lp55xx_chip *chip = led->chip; + int ret; + int i; + + mutex_lock(&chip->lock); + for (i = 0; i < led->mc_cdev.num_colors; i++) { + ret = lp55xx_write(chip, + LP5523_REG_LED_PWM_BASE + + led->mc_cdev.subled_info[i].channel, + led->mc_cdev.subled_info[i].brightness); + if (ret) + break; + } + mutex_unlock(&chip->lock); + return ret; +} + static int lp5523_led_brightness(struct lp55xx_led *led) { struct lp55xx_chip *chip = led->chip; @@ -857,6 +876,7 @@ static struct lp55xx_device_config lp5523_cfg = { .max_channel = LP5523_MAX_LEDS, .post_init_device = lp5523_post_init_device, .brightness_fn = lp5523_led_brightness, + .multicolor_brightness_fn = lp5523_multicolor_brightness, .set_led_current = lp5523_set_led_current, .firmware_cb = lp5523_firmware_loaded, .run_engine = lp5523_run_engine, -- 2.26.2