The older SoCs like Armada XP support a 2500BaseX mode in the datasheets
referred to as DR-SGMII (Double rated SGMII) or HS-SGMII (High Speed
SGMII). This is an upclocked 1000BaseX mode, thus
PHY_INTERFACE_MODE_2500BASEX is the appropriate mode define for it.
adding support for it merely means writing the correct magic value into
the MVNETA_SERDES_CFG register.
Signed-off-by: Sascha Hauer <s.ha...@pengutronix.de>
---
drivers/net/ethernet/marvell/mvneta.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/ethernet/marvell/mvneta.c
b/drivers/net/ethernet/marvell/mvneta.c
index 9933eb4577d43..23d41550edb0d 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -110,6 +110,7 @@
#define MVNETA_SERDES_CFG 0x24A0
#define MVNETA_SGMII_SERDES_PROTO 0x0cc7
#define MVNETA_QSGMII_SERDES_PROTO 0x0667
+#define MVNETA_HSGMII_SERDES_PROTO 0x1107
#define MVNETA_TYPE_PRIO 0x24bc
#define MVNETA_FORCE_UNI BIT(21)
#define MVNETA_TXQ_CMD_1 0x24e4
@@ -3549,6 +3550,11 @@ static int mvneta_config_interface(struct mvneta_port
*pp,
mvreg_write(pp, MVNETA_SERDES_CFG,
MVNETA_SGMII_SERDES_PROTO);
break;
+
+ case PHY_INTERFACE_MODE_2500BASEX:
+ mvreg_write(pp, MVNETA_SERDES_CFG,
+ MVNETA_HSGMII_SERDES_PROTO);
+ break;
default:
return -EINVAL;
}
--
2.27.0
