On Wed, Jun 17, 2020 at 01:20:15PM -0500, Dan Murphy wrote:
> Add a helper function that will return the index in the array for the
> passed in internal delay value. The helper requires the array, size and
> delay value.
>
> The helper will then return the index for the exact match or return the
> index for the index to the closest smaller value.
>
> Signed-off-by: Dan Murphy <dmur...@ti.com>
> ---
> drivers/net/phy/phy_device.c | 68 ++++++++++++++++++++++++++++++++++++
> include/linux/phy.h | 4 +++
> 2 files changed, 72 insertions(+)
>
> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
> index 04946de74fa0..611d4e68e3c6 100644
> --- a/drivers/net/phy/phy_device.c
> +++ b/drivers/net/phy/phy_device.c
> @@ -31,6 +31,7 @@
> #include <linux/mdio.h>
> #include <linux/io.h>
> #include <linux/uaccess.h>
> +#include <linux/property.h>
>
> MODULE_DESCRIPTION("PHY library");
> MODULE_AUTHOR("Andy Fleming");
> @@ -2657,6 +2658,73 @@ void phy_get_pause(struct phy_device *phydev, bool
> *tx_pause, bool *rx_pause)
> }
> EXPORT_SYMBOL(phy_get_pause);
>
> +/**
> + * phy_get_delay_index - returns the index of the internal delay
> + * @phydev: phy_device struct
> + * @dev: pointer to the devices device struct
> + * @delay_values: array of delays the PHY supports
> + * @size: the size of the delay array
> + * @is_rx: boolean to indicate to get the rx internal delay
> + *
> + * Returns the index within the array of internal delay passed in.
> + * Or if size == 0 then the delay read from the firmware is returned.
> + * The array must be in ascending order.
> + * Return errno if the delay is invalid or cannot be found.
> + */
> +s32 phy_get_internal_delay(struct phy_device *phydev, struct device *dev,
> + const int *delay_values, int size, bool is_rx)
> +{
> + int ret;
> + int i;
> + s32 delay;
> +
> + if (is_rx)
> + ret = device_property_read_u32(dev, "rx-internal-delay-ps",
> + &delay);
> + else
> + ret = device_property_read_u32(dev, "tx-internal-delay-ps",
> + &delay);
> + if (ret) {
> + phydev_err(phydev, "internal delay not defined\n");
This is an optional property. So printing an error message seems heavy
handed.
Maybe it would be better to default to 0 if the property is not found,
and continue with the lookup in the table to find what value should be
written for a 0ps delay?
Andrew
