Please see the bisection report below about a kernel panic. Reports aren't automatically sent to the public while we're trialing new bisection features on kernelci.org but this one looks valid.
See the kernel Oops due to a NULL pointer followed by a panic: https://storage.kernelci.org/next/master/next-20200618/arm/oxnas_v6_defconfig/gcc-8/lab-baylibre/baseline-ox820-cloudengines-pogoplug-series-3.html#L504 Thanks, Guillaume On 18/06/2020 13:20, kernelci.org bot wrote: > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > * This automated bisection report was sent to you on the basis * > * that you may be involved with the breaking commit it has * > * found. No manual investigation has been done to verify it, * > * and the root cause of the problem may be somewhere else. * > * * > * If you do send a fix, please include this trailer: * > * Reported-by: "kernelci.org bot" <[email protected]> * > * * > * Hope this helps! * > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * > > next/master bisection: baseline.login on ox820-cloudengines-pogoplug-series-3 > > Summary: > Start: ce2cc8efd7a4 Add linux-next specific files for 20200618 > Plain log: > https://storage.kernelci.org/next/master/next-20200618/arm/oxnas_v6_defconfig/gcc-8/lab-baylibre/baseline-ox820-cloudengines-pogoplug-series-3.txt > HTML log: > https://storage.kernelci.org/next/master/next-20200618/arm/oxnas_v6_defconfig/gcc-8/lab-baylibre/baseline-ox820-cloudengines-pogoplug-series-3.html > Result: 7b929258ff0e mtd: rawnand: Allocate the interface > configurations dynamically > > Checks: > revert: PASS > verify: PASS > > Parameters: > Tree: next > URL: > https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git > Branch: master > Target: ox820-cloudengines-pogoplug-series-3 > CPU arch: arm > Lab: lab-baylibre > Compiler: gcc-8 > Config: oxnas_v6_defconfig > Test case: baseline.login > > Breaking commit found: > > ------------------------------------------------------------------------------- > commit 7b929258ff0e913616e21661a757f5ecb776d337 > Author: Miquel Raynal <[email protected]> > Date: Fri May 29 13:13:22 2020 +0200 > > mtd: rawnand: Allocate the interface configurations dynamically > > Instead of manipulating the statically allocated structure and copy > timings around, allocate one at identification time and save it in the > nand_chip structure once it has been initialized. > > All NAND chips using the same interface configuration during reset and > startup, we define a helper to retrieve a single reset interface > configuration object, shared across all NAND chips. > > We use a second pointer to always have a reference on the currently > applied interface configuration, which may either point to the "best > interface configuration" or to the "default reset interface > configuration". > > Signed-off-by: Miquel Raynal <[email protected]> > Reviewed-by: Boris Brezillon <[email protected]> > Link: > https://lore.kernel.org/linux-mtd/[email protected] > > diff --git a/drivers/mtd/nand/raw/internals.h > b/drivers/mtd/nand/raw/internals.h > index 5ebfbb89e572..012876e14317 100644 > --- a/drivers/mtd/nand/raw/internals.h > +++ b/drivers/mtd/nand/raw/internals.h > @@ -93,6 +93,7 @@ onfi_find_closest_sdr_mode(const struct nand_sdr_timings > *spec_timings); > int nand_choose_best_sdr_timings(struct nand_chip *chip, > struct nand_interface_config *iface, > struct nand_sdr_timings *spec_timings); > +const struct nand_interface_config *nand_get_reset_interface_config(void); > int nand_get_features(struct nand_chip *chip, int addr, u8 > *subfeature_param); > int nand_set_features(struct nand_chip *chip, int addr, u8 > *subfeature_param); > int nand_read_page_raw_notsupp(struct nand_chip *chip, u8 *buf, > diff --git a/drivers/mtd/nand/raw/nand_base.c > b/drivers/mtd/nand/raw/nand_base.c > index 753328f106c1..4a0d486210e9 100644 > --- a/drivers/mtd/nand/raw/nand_base.c > +++ b/drivers/mtd/nand/raw/nand_base.c > @@ -928,9 +928,9 @@ static int nand_reset_interface(struct nand_chip *chip, > int chipnr) > * timings to timing mode 0. > */ > > - onfi_fill_interface_config(chip, &chip->interface_config, > - NAND_SDR_IFACE, 0); > - ret = ops->setup_interface(chip, chipnr, &chip->interface_config); > + chip->current_interface_config = nand_get_reset_interface_config(); > + ret = ops->setup_interface(chip, chipnr, > + chip->current_interface_config); > if (ret) > pr_err("Failed to configure data interface to SDR timing mode > 0\n"); > > @@ -949,7 +949,8 @@ static int nand_reset_interface(struct nand_chip *chip, > int chipnr) > */ > static int nand_setup_interface(struct nand_chip *chip, int chipnr) > { > - u8 mode = chip->interface_config.timings.mode; > + const struct nand_controller_ops *ops = chip->controller->ops; > + u8 mode = chip->best_interface_config->timings.mode; > u8 tmode_param[ONFI_SUBFEATURE_PARAM_LEN] = { mode, }; > int ret; > > @@ -967,14 +968,13 @@ static int nand_setup_interface(struct nand_chip *chip, > int chipnr) > } > > /* Change the mode on the controller side */ > - ret = chip->controller->ops->setup_interface(chip, chipnr, > - &chip->interface_config); > + ret = ops->setup_interface(chip, chipnr, chip->best_interface_config); > if (ret) > return ret; > > /* Check the mode has been accepted by the chip, if supported */ > if (!nand_supports_get_features(chip, ONFI_FEATURE_ADDR_TIMING_MODE)) > - return 0; > + goto update_interface_config; > > memset(tmode_param, 0, ONFI_SUBFEATURE_PARAM_LEN); > nand_select_target(chip, chipnr); > @@ -990,6 +990,9 @@ static int nand_setup_interface(struct nand_chip *chip, > int chipnr) > goto err_reset_chip; > } > > +update_interface_config: > + chip->current_interface_config = chip->best_interface_config; > + > return 0; > > err_reset_chip: > @@ -1031,8 +1034,10 @@ int nand_choose_best_sdr_timings(struct nand_chip > *chip, > /* Verify the controller supports the requested interface */ > ret = ops->setup_interface(chip, NAND_DATA_IFACE_CHECK_ONLY, > iface); > - if (!ret) > + if (!ret) { > + chip->best_interface_config = iface; > return ret; > + } > > /* Fallback to slower modes */ > best_mode = iface->timings.mode; > @@ -1046,9 +1051,11 @@ int nand_choose_best_sdr_timings(struct nand_chip > *chip, > ret = ops->setup_interface(chip, NAND_DATA_IFACE_CHECK_ONLY, > iface); > if (!ret) > - return 0; > + break; > } > > + chip->best_interface_config = iface; > + > return 0; > } > > @@ -1067,15 +1074,25 @@ int nand_choose_best_sdr_timings(struct nand_chip > *chip, > */ > static int nand_choose_interface_config(struct nand_chip *chip) > { > + struct nand_interface_config *iface; > + int ret; > + > if (!nand_controller_can_setup_interface(chip)) > return 0; > > + iface = kzalloc(sizeof(*iface), GFP_KERNEL); > + if (!iface) > + return -ENOMEM; > + > if (chip->ops.choose_interface_config) > - return chip->ops.choose_interface_config(chip, > - > &chip->interface_config); > + ret = chip->ops.choose_interface_config(chip, iface); > + else > + ret = nand_choose_best_sdr_timings(chip, iface, NULL); > > - return nand_choose_best_sdr_timings(chip, &chip->interface_config, > - NULL); > + if (ret) > + kfree(iface); > + > + return ret; > } > > /** > @@ -2501,7 +2518,6 @@ EXPORT_SYMBOL_GPL(nand_subop_get_data_len); > */ > int nand_reset(struct nand_chip *chip, int chipnr) > { > - struct nand_interface_config saved_intf_config = chip->interface_config; > int ret; > > ret = nand_reset_interface(chip, chipnr); > @@ -2526,11 +2542,9 @@ int nand_reset(struct nand_chip *chip, int chipnr) > * nand_setup_interface() uses ->set/get_features() which would > * fail anyway as the parameter page is not available yet. > */ > - if (!memcmp(&chip->interface_config, &saved_intf_config, > - sizeof(saved_intf_config))) > + if (!chip->best_interface_config) > return 0; > > - chip->interface_config = saved_intf_config; > ret = nand_setup_interface(chip, chipnr); > if (ret) > return ret; > @@ -5198,7 +5212,7 @@ static int nand_scan_ident(struct nand_chip *chip, > unsigned int maxchips, > mutex_init(&chip->lock); > > /* Enforce the right timings for reset/detection */ > - onfi_fill_interface_config(chip, &chip->interface_config, > NAND_SDR_IFACE, 0); > + chip->current_interface_config = nand_get_reset_interface_config(); > > ret = nand_dt_init(chip); > if (ret) > @@ -5994,7 +6008,7 @@ static int nand_scan_tail(struct nand_chip *chip) > for (i = 0; i < nanddev_ntargets(&chip->base); i++) { > ret = nand_setup_interface(chip, i); > if (ret) > - goto err_nanddev_cleanup; > + goto err_free_interface_config; > } > > /* Check, if we should skip the bad block table scan */ > @@ -6004,10 +6018,12 @@ static int nand_scan_tail(struct nand_chip *chip) > /* Build bad block table */ > ret = nand_create_bbt(chip); > if (ret) > - goto err_nanddev_cleanup; > + goto err_free_interface_config; > > return 0; > > +err_free_interface_config: > + kfree(chip->best_interface_config); > > err_nanddev_cleanup: > nanddev_cleanup(&chip->base); > @@ -6101,6 +6117,9 @@ void nand_cleanup(struct nand_chip *chip) > & NAND_BBT_DYNAMICSTRUCT) > kfree(chip->badblock_pattern); > > + /* Free the data interface */ > + kfree(chip->best_interface_config); > + > /* Free manufacturer priv data. */ > nand_manufacturer_cleanup(chip); > > diff --git a/drivers/mtd/nand/raw/nand_timings.c > b/drivers/mtd/nand/raw/nand_timings.c > index 1e22006c79ba..94d832646487 100644 > --- a/drivers/mtd/nand/raw/nand_timings.c > +++ b/drivers/mtd/nand/raw/nand_timings.c > @@ -292,6 +292,12 @@ static const struct nand_interface_config > onfi_sdr_timings[] = { > }, > }; > > +/* All NAND chips share the same reset data interface: SDR mode 0 */ > +const struct nand_interface_config *nand_get_reset_interface_config(void) > +{ > + return &onfi_sdr_timings[0]; > +} > + > /** > * onfi_find_closest_sdr_mode - Derive the closest ONFI SDR timing mode > given a > * set of timings > diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h > index a2427c67d38b..a725b620aca2 100644 > --- a/include/linux/mtd/rawnand.h > +++ b/include/linux/mtd/rawnand.h > @@ -1069,7 +1069,11 @@ struct nand_manufacturer { > * @options: Various chip options. They can partly be set to inform nand_scan > * about special functionality. See the defines for further > * explanation. > - * @interface_config: NAND interface timing information > + * @current_interface_config: The currently used NAND interface configuration > + * @best_interface_config: The best NAND interface configuration which fits > both > + * the NAND chip and NAND controller constraints. If > + * unset, the default reset interface configuration > must > + * be used. > * @bbt_erase_shift: Number of address bits in a bbt entry > * @bbt_options: Bad block table specific options. All options used here must > * come from bbm.h. By default, these options will be copied to > @@ -1116,7 +1120,8 @@ struct nand_chip { > unsigned int options; > > /* Data interface */ > - struct nand_interface_config interface_config; > + const struct nand_interface_config *current_interface_config; > + struct nand_interface_config *best_interface_config; > > /* Bad block information */ > unsigned int bbt_erase_shift; > @@ -1209,7 +1214,7 @@ static inline struct device_node > *nand_get_flash_node(struct nand_chip *chip) > static inline const struct nand_interface_config * > nand_get_interface_config(struct nand_chip *chip) > { > - return &chip->interface_config; > + return chip->current_interface_config; > } > > /* > ------------------------------------------------------------------------------- > > > Git bisection log: > > ------------------------------------------------------------------------------- > git bisect start > # good: [1b5044021070efa3259f3e9548dc35d1eb6aa844] Merge tag > 'dma-mapping-5.8-3' of git://git.infradead.org/users/hch/dma-mapping > git bisect good 1b5044021070efa3259f3e9548dc35d1eb6aa844 > # bad: [ce2cc8efd7a40cbd17841add878cb691d0ce0bba] Add linux-next specific > files for 20200618 > git bisect bad ce2cc8efd7a40cbd17841add878cb691d0ce0bba > # bad: [b91d047b9cb0441237354c3b4fd40fb5a6e649ef] next-20200616/amdgpu > git bisect bad b91d047b9cb0441237354c3b4fd40fb5a6e649ef > # good: [ff028acf8c34f3707946fc806b8873ddb95e0f9a] Merge remote-tracking > branch 'hid/for-next' > git bisect good ff028acf8c34f3707946fc806b8873ddb95e0f9a > # good: [5073201f3b80c6d798519589a81263563b4f8520] drm/amdgpu: add internal > reg offset translation for VCN inst 1 > git bisect good 5073201f3b80c6d798519589a81263563b4f8520 > # good: [f3cdec463796c25ab829e5959488f269812fa1bb] Merge remote-tracking > branch 'gfs2/for-next' > git bisect good f3cdec463796c25ab829e5959488f269812fa1bb > # good: [1134d52d6f95ae61fbd2da980a29f05c656c5934] Revert > "drm/[radeon|amdgpu]: Replace one-element array and use struct_size() helper" > git bisect good 1134d52d6f95ae61fbd2da980a29f05c656c5934 > # good: [3b6588fa6f92297dc26681686fd3c719647576c4] mtd: rawnand: toshiba: > Choose the interface configuration for TH58NVG2S3HBAI4 > git bisect good 3b6588fa6f92297dc26681686fd3c719647576c4 > # bad: [97bd0ed43524a3530d5651627779c0b40385187e] mtd: rawnand: qcom: set BAM > mode only if not set already > git bisect bad 97bd0ed43524a3530d5651627779c0b40385187e > # bad: [ebbd1aae9deeccf8c2adcd84dd536b451110bf07] mtd: rawnand: fsl_upm: Use > gpio descriptors > git bisect bad ebbd1aae9deeccf8c2adcd84dd536b451110bf07 > # bad: [d8a826cfb059b2d5d4e97ced9469d6bcf7cf40f7] mtd: rawnand: fsl_upm: Get > rid of the unused fsl_upm_nand.parts field > git bisect bad d8a826cfb059b2d5d4e97ced9469d6bcf7cf40f7 > # bad: [7b929258ff0e913616e21661a757f5ecb776d337] mtd: rawnand: Allocate the > interface configurations dynamically > git bisect bad 7b929258ff0e913616e21661a757f5ecb776d337 > # good: [a82f691ad48c63af22844cee4eb3107cf5d9ff00] mtd: rawnand: Get rid of > the default ONFI timing mode > git bisect good a82f691ad48c63af22844cee4eb3107cf5d9ff00 > # first bad commit: [7b929258ff0e913616e21661a757f5ecb776d337] mtd: rawnand: > Allocate the interface configurations dynamically > ------------------------------------------------------------------------------- >
