Hi,

On Sat, Jun 06, 2020 at 12:43:59AM +0200, Sebastian Reichel wrote:
> While strongly recommended, not all devices have a gpio to
> detect if the charger is connected. This moves the 'gpios'
> from required to optional section.
> 
> This also modifies error handling for the GPIO a bit: We
> no longer fallback to pdata, if a GPIO is specified using
> GPIO descriptor tables. This is a bit cleaner and does
> not have any real impact: There are only two mainline pdata
> users (arm/mach-sa1100/collie.c, arm/mach-pxa/tosa.c) and
> none of them specify the GPIO via gpiod descriptor tables.
> Once both have been converted the driver's support for
> specifying GPIOs numbers in pdata will be dropped.
> 
> Signed-off-by: Sebastian Reichel <sebastian.reic...@collabora.com>
> ---

Thanks, queued.

-- Sebastian

>  .../bindings/power/supply/gpio-charger.yaml   |  7 +++-
>  drivers/power/supply/gpio-charger.c           | 38 ++++++++++++-------
>  2 files changed, 31 insertions(+), 14 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml 
> b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
> index 78b167c62ab1..30eabbb14ef3 100644
> --- a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
> @@ -41,7 +41,12 @@ properties:
>  
>  required:
>    - compatible
> -  - gpios
> +
> +anyOf:
> +  - required:
> +    - gpios
> +  - required:
> +    - charge-status-gpios
>  
>  additionalProperties: false
>  
> diff --git a/drivers/power/supply/gpio-charger.c 
> b/drivers/power/supply/gpio-charger.c
> index 1b959c7f8b0e..875735d50716 100644
> --- a/drivers/power/supply/gpio-charger.c
> +++ b/drivers/power/supply/gpio-charger.c
> @@ -112,9 +112,14 @@ static int gpio_charger_get_irq(struct device *dev, void 
> *dev_id,
>       return irq;
>  }
>  
> +/*
> + * The entries will be overwritten by driver's probe routine depending
> + * on the available features. This list ensures, that the array is big
> + * enough for all optional features.
> + */
>  static enum power_supply_property gpio_charger_properties[] = {
>       POWER_SUPPLY_PROP_ONLINE,
> -     POWER_SUPPLY_PROP_STATUS /* Must always be last in the array. */
> +     POWER_SUPPLY_PROP_STATUS,
>  };
>  
>  static int gpio_charger_probe(struct platform_device *pdev)
> @@ -128,6 +133,7 @@ static int gpio_charger_probe(struct platform_device 
> *pdev)
>       int charge_status_irq;
>       unsigned long flags;
>       int ret;
> +     int num_props = 0;
>  
>       if (!pdata && !dev->of_node) {
>               dev_err(dev, "No platform data\n");
> @@ -142,13 +148,13 @@ static int gpio_charger_probe(struct platform_device 
> *pdev)
>        * This will fetch a GPIO descriptor from device tree, ACPI or
>        * boardfile descriptor tables. It's good to try this first.
>        */
> -     gpio_charger->gpiod = devm_gpiod_get(dev, NULL, GPIOD_IN);
> +     gpio_charger->gpiod = devm_gpiod_get_optional(dev, NULL, GPIOD_IN);
>  
>       /*
> -      * If this fails and we're not using device tree, try the
> -      * legacy platform data method.
> +      * Fallback to legacy platform data method, if no GPIO is specified
> +      * using boardfile descriptor tables.
>        */
> -     if (IS_ERR(gpio_charger->gpiod) && !dev->of_node) {
> +     if (!gpio_charger->gpiod && pdata) {
>               /* Non-DT: use legacy GPIO numbers */
>               if (!gpio_is_valid(pdata->gpio)) {
>                       dev_err(dev, "Invalid gpio pin in pdata\n");
> @@ -173,17 +179,23 @@ static int gpio_charger_probe(struct platform_device 
> *pdev)
>               return PTR_ERR(gpio_charger->gpiod);
>       }
>  
> +     if (gpio_charger->gpiod) {
> +             gpio_charger_properties[num_props] = POWER_SUPPLY_PROP_ONLINE;
> +             num_props++;
> +     }
> +
>       charge_status = devm_gpiod_get_optional(dev, "charge-status", GPIOD_IN);
> -     gpio_charger->charge_status = charge_status;
> -     if (IS_ERR(gpio_charger->charge_status))
> -             return PTR_ERR(gpio_charger->charge_status);
> +     if (IS_ERR(charge_status))
> +             return PTR_ERR(charge_status);
> +     if (charge_status) {
> +             gpio_charger->charge_status = charge_status;
> +             gpio_charger_properties[num_props] = POWER_SUPPLY_PROP_STATUS;
> +             num_props++;
> +     }
>  
>       charger_desc = &gpio_charger->charger_desc;
>       charger_desc->properties = gpio_charger_properties;
> -     charger_desc->num_properties = ARRAY_SIZE(gpio_charger_properties);
> -     /* Remove POWER_SUPPLY_PROP_STATUS from the supported properties. */
> -     if (!gpio_charger->charge_status)
> -             charger_desc->num_properties -= 1;
> +     charger_desc->num_properties = num_props;
>       charger_desc->get_property = gpio_charger_get_property;
>  
>       psy_cfg.of_node = dev->of_node;
> @@ -269,6 +281,6 @@ static struct platform_driver gpio_charger_driver = {
>  module_platform_driver(gpio_charger_driver);
>  
>  MODULE_AUTHOR("Lars-Peter Clausen <l...@metafoo.de>");
> -MODULE_DESCRIPTION("Driver for chargers which report their online status 
> through a GPIO");
> +MODULE_DESCRIPTION("Driver for chargers only communicating via GPIO(s)");
>  MODULE_LICENSE("GPL");
>  MODULE_ALIAS("platform:gpio-charger");
> -- 
> 2.26.2
> 

Attachment: signature.asc
Description: PGP signature

Reply via email to