On Mon, Jun 29, 2020 at 05:42:07PM +0100, Sudeep Holla wrote: > On Mon, Jun 29, 2020 at 05:14:50PM +0100, Mark Brown wrote: > > On Mon, Jun 29, 2020 at 04:07:28PM +0100, Sudeep Holla wrote: > > > > > The specification states clearly: > > > "... all devices in the system must be in a state that is compatible > > > with entry into the system state. These preconditions are beyond the scope > > > of this specification and are therefore not described here." > > > "Prior to the call, the OS must disable all sources of wakeup other than > > > those it needs to support for its implementation of suspend to RAM."
> > This gets a bit circular for a generic OS since the OS needs some way to > > figure out what it's supposed to do on a given platform - for example > > the OS may be happy to use wakeup sources that the firmware is just > > going to cut power on. > While I understand the sentiments here, PSCI is targeted to address CPU > power state management mainly and system states like suspend/reset and > poweroff which involves last CPU. This is one of the reason it is out of > the scope of the specification. Sure, but as soon as we start talking about the last CPU stuff we're inevitably talking about the system as a whole. > Here is my understanding. DT specifies all the wakeup sources. Linux > can configure those and user may choose to enable a subset of them is > wakeup. As stated in the spec and also based on what we already do in > the kernel, we disable all other wakeup sources. > The PSCI firmware can then either read those from the interrupt controller > or based on static platform understanding, must not disable those wakeup > sources. That bit about static platform understanding isn't super helpful for the OS, so long as the firmware might do that the OS is pretty much out of luck. > > > I see nothing has been fixed in the firmware too and we are still > > > discussing the same after 3 years 😄. Clearly we should start trusting > > > firmware and built capability to fix and replace it if there are bugs > > > just like kernel and stop hacking around in the kernel to deal with > > > just broken platform/psci firmware. > > This isn't just an issue of buggy firmware as far as I can see, it's > > also a lack of ability for the OS and firmware to communicate > > information about their intentions to each other. As things stand you'd > > need to put static information in the DT. > It is easy for DT to get out of sync with firmware unless it is generated > by the same firmware. That's the reason why I am against such multiple The ability for things to get out of sync also concerns me as I said further back in the thread but I'm not sure we have much alternative, realistically we're going to need some facility to work around firmware that isn't ideal. > sources of information. I understand ACPI has more flexibility and I did ACPI has a much stronger idea of what the system looks like which helps it a lot here. > Each device or platform having its specific property in DT is not scalable. > Not sure if it is a generic problem. If it is, I would like to understand > more details on such lack of ability for communtication between OS and > firmware. It seems like a generic issue from where I'm sitting.
signature.asc
Description: PGP signature