qup has a requirement to vote on the performance state of the CX domain
in sc7180 devices. Add OPP tables for these and also add power-domains
property for all qup instances for uart and spi.
i2c does not support scaling and uses a fixed clock.
Signed-off-by: Rajendra Nayak <rna...@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 59 ++++++++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi
b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index ad57df2..78fef54 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -537,6 +537,25 @@
status = "disabled";
};
+ qup_opp_table: qup-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-128000000 {
+ opp-hz = /bits/ 64 <128000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x008c0000 0 0x6000>;
@@ -579,6 +598,8 @@
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0
&qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
@@ -593,6 +614,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0
&qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
@@ -627,6 +650,8 @@
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0
&qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
@@ -641,6 +666,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0
&qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
@@ -673,6 +700,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0
&qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
@@ -707,6 +736,8 @@
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0
&qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
@@ -721,6 +752,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart3_default>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0
&qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
@@ -753,6 +786,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0
&qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
@@ -787,6 +822,8 @@
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0
&qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
@@ -801,6 +838,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0
&qup_virt SLAVE_QUP_CORE_0>,
<&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QUP_0>;
interconnect-names = "qup-core", "qup-config";
@@ -850,6 +889,8 @@
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1
&qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
@@ -864,6 +905,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart6_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1
&qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
@@ -896,6 +939,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart7_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1
&qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
@@ -930,6 +975,8 @@
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1
&qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
@@ -944,6 +991,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart8_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1
&qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
@@ -976,6 +1025,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart9_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1
&qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
@@ -1010,6 +1061,8 @@
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1
&qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
@@ -1024,6 +1077,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart10_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1
&qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
@@ -1058,6 +1113,8 @@
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1
&qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
@@ -1072,6 +1129,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart11_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1
&qup_virt SLAVE_QUP_CORE_1>,
<&gem_noc MASTER_APPSS_PROC
&config_noc SLAVE_QUP_1>;
interconnect-names = "qup-core", "qup-config";
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
