On Thu, Jul 2, 2020 at 10:04 PM Florian Fainelli <f.faine...@gmail.com> wrote: > > > > On 7/2/2020 12:18 PM, Robert Marko wrote: > > On Thu, Jul 2, 2020 at 3:38 PM Andrew Lunn <and...@lunn.ch> wrote: > >> > >>> + clock-frequency: > >>> + default: 100000000 > >> > >> IEEE 802.3 says the default should be 2.5MHz. Some PHYs will go > >> faster, but 100MHz seems unlikely! > > This MDIO controller has an internal divider, by default its set for > > 100MHz clock. > > In IPQ4019 MDIO clock is not controllable but in IPQ6018 etc it's > > controllable. > > That is the only combination I have currently seen used by Qualcomm. > > Not sure I understand here, the 'clock-frequency' is supposed to denote > the MDIO bus output clock frequency, that is the frequency at which all > MDIO devices are going to operate at. Is this 100MHz a clock that feeds > into the MDIO block and get internally divided by a programmable > register to obtain an output MDIO clock? Yes, in this case that 100MHz comes from the GCC clock controller and is then internally divided by the MDIO. I do not know what is the actual output MDIO bus frequency as datasheet only denotes that MDC divide bits in the mode register are set for 100MHz incoming clock. > -- > Florian
