> -----Original Message----- > From: linux-pm-ow...@vger.kernel.org <linux-pm-ow...@vger.kernel.org> > On Behalf Of Rafael J. Wysocki > Sent: Tuesday, July 14, 2020 6:51 PM > To: Pawnikar, Sumeet R <sumeet.r.pawni...@intel.com>; Srinivas > Pandruvada <srinivas.pandruv...@linux.intel.com> > Cc: Rafael J. Wysocki <r...@rjwysocki.net>; Zhang, Rui > <rui.zh...@intel.com>; Linux PM <linux...@vger.kernel.org>; Linux Kernel > Mailing List <linux-kernel@vger.kernel.org>; Shevchenko, Andriy > <andriy.shevche...@intel.com> > Subject: Re: [PATCH v2] powercap: Add Power Limit4 support > > On Tue, Jul 14, 2020 at 10:22 AM Sumeet Pawnikar > <sumeet.r.pawni...@intel.com> wrote: > > > > Modern Intel Mobile platforms support power limit4 (PL4), which is the > > SoC package level maximum power limit (in Watts). It can be used to > > preemptively limits potential SoC power to prevent power spikes from > > tripping the power adapter and battery over-current protection. > > This patch enables this feature by exposing package level peak power > > capping control to userspace via RAPL sysfs interface. With this, > > application like DTPF can modify PL4 power limit, the similar way of > > other package power limit (PL1). > > As this feature is not tested on previous generations, here it is > > enabled only for the platform that has been verified to work, for > > safety concerns. > > Thanks for the better changelog! > > > Signed-off-by: Sumeet Pawnikar <sumeet.r.pawni...@intel.com> > > Signed-off-by: Zhang Rui <rui.zh...@intel.com> > > But why is the Rui's S-o-b under your patch? > > Is it there because Rui has contributed to the patch? If so, you should have > used the Co-developed-by tag instead. >
Sure, I will update this accordingly. Thanks, Sumeet. > Srinivas, does the patch look good to you? > > > --- > > Changes in v2: > > - Addressed review comments from Rafael. > > - Made the commit message more clearer. > > - Updated powercap documentation. > > --- > > Documentation/power/powercap/powercap.rst | 14 +++++--- > > drivers/powercap/intel_rapl_common.c | 54 > +++++++++++++++++++++++++++-- > > drivers/powercap/intel_rapl_msr.c | 15 ++++++++ > > include/linux/intel_rapl.h | 5 ++- > > 4 files changed, 80 insertions(+), 8 deletions(-) > > > > diff --git a/Documentation/power/powercap/powercap.rst > > b/Documentation/power/powercap/powercap.rst > > index 7ae3b44c7624..b3af059b6d5d 100644 > > --- a/Documentation/power/powercap/powercap.rst > > +++ b/Documentation/power/powercap/powercap.rst > > @@ -167,11 +167,12 @@ For example:: > > package-0 > > --------- > > > > -The Intel RAPL technology allows two constraints, short term and long > > term, -with two different time windows to be applied to each power > > zone. Thus for -each zone there are 2 attributes representing the > > constraint names, 2 power -limits and 2 attributes representing the > > sizes of the time windows. Such that, > > -constraint_j_* attributes correspond to the jth constraint (j = 0,1). > > +Depending on different power zones, the Intel RAPL technology allows > > +one or multiple constraints like short term, long term and peak > > +power, with different time windows to be applied to each power zone. > > +All the zones contain attributes representing the constraint names, > > +power limits and the sizes of the time windows. Such that, > > +constraint_j_* attributes correspond to the jth constraint (j = 0,1,2). > > > > For example:: > > > > @@ -181,6 +182,9 @@ For example:: > > constraint_1_name > > constraint_1_power_limit_uw > > constraint_1_time_window_us > > + constraint_2_name > > + constraint_2_power_limit_uw > > + constraint_2_time_window_us > > > > Power Zone Attributes > > ===================== > > diff --git a/drivers/powercap/intel_rapl_common.c > > b/drivers/powercap/intel_rapl_common.c > > index 61a63a16b5e7..a8bcc58d61f0 100644 > > --- a/drivers/powercap/intel_rapl_common.c > > +++ b/drivers/powercap/intel_rapl_common.c > > @@ -39,6 +39,8 @@ > > #define POWER_HIGH_LOCK BIT_ULL(63) > > #define POWER_LOW_LOCK BIT(31) > > > > +#define POWER_LIMIT4_MASK 0x1FFF > > + > > #define TIME_WINDOW1_MASK (0x7FULL<<17) > > #define TIME_WINDOW2_MASK (0x7FULL<<49) > > > > @@ -82,6 +84,7 @@ enum unit_type { > > > > static const char pl1_name[] = "long_term"; static const char > > pl2_name[] = "short_term"; > > +static const char pl4_name[] = "peak_power"; > > > > #define power_zone_to_rapl_domain(_zone) \ > > container_of(_zone, struct rapl_domain, power_zone) @@ -337,6 > > +340,9 @@ static int set_power_limit(struct powercap_zone *power_zone, > int cid, > > case PL2_ENABLE: > > rapl_write_data_raw(rd, POWER_LIMIT2, power_limit); > > break; > > + case PL4_ENABLE: > > + rapl_write_data_raw(rd, POWER_LIMIT4, power_limit); > > + break; > > default: > > ret = -EINVAL; > > } > > @@ -371,6 +377,9 @@ static int get_current_power_limit(struct > powercap_zone *power_zone, int cid, > > case PL2_ENABLE: > > prim = POWER_LIMIT2; > > break; > > + case PL4_ENABLE: > > + prim = POWER_LIMIT4; > > + break; > > default: > > put_online_cpus(); > > return -EINVAL; > > @@ -440,6 +449,13 @@ static int get_time_window(struct powercap_zone > *power_zone, int cid, > > case PL2_ENABLE: > > ret = rapl_read_data_raw(rd, TIME_WINDOW2, true, &val); > > break; > > + case PL4_ENABLE: > > + /* > > + * Time window parameter is not applicable for PL4 entry > > + * so assigining '0' as default value. > > + */ > > + val = 0; > > + break; > > default: > > put_online_cpus(); > > return -EINVAL; > > @@ -483,6 +499,9 @@ static int get_max_power(struct powercap_zone > *power_zone, int id, u64 *data) > > case PL2_ENABLE: > > prim = MAX_POWER; > > break; > > + case PL4_ENABLE: > > + prim = MAX_POWER; > > + break; > > default: > > put_online_cpus(); > > return -EINVAL; > > @@ -492,6 +511,10 @@ static int get_max_power(struct powercap_zone > *power_zone, int id, u64 *data) > > else > > *data = val; > > > > + /* As a generalization rule, PL4 would be around two times PL2. */ > > + if (rd->rpl[id].prim_id == PL4_ENABLE) > > + *data = *data * 2; > > + > > put_online_cpus(); > > > > return ret; > > @@ -524,12 +547,22 @@ static void rapl_init_domains(struct rapl_package > *rp) > > rd->id = i; > > rd->rpl[0].prim_id = PL1_ENABLE; > > rd->rpl[0].name = pl1_name; > > - /* some domain may support two power limits */ > > - if (rp->priv->limits[i] == 2) { > > + > > + /* > > + * The PL2 power domain is applicable for limits two > > + * and limits three > > + */ > > + if (rp->priv->limits[i] >= 2) { > > rd->rpl[1].prim_id = PL2_ENABLE; > > rd->rpl[1].name = pl2_name; > > } > > > > + /* Enable PL4 domain if the total power limits are three */ > > + if (rp->priv->limits[i] == 3) { > > + rd->rpl[2].prim_id = PL4_ENABLE; > > + rd->rpl[2].name = pl4_name; > > + } > > + > > for (j = 0; j < RAPL_DOMAIN_REG_MAX; j++) > > rd->regs[j] = rp->priv->regs[i][j]; > > > > @@ -587,6 +620,8 @@ static u64 rapl_unit_xlate(struct rapl_domain *rd, > enum unit_type type, > > RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0), > > PRIMITIVE_INFO_INIT(POWER_LIMIT2, POWER_LIMIT2_MASK, 32, > > RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0), > > + PRIMITIVE_INFO_INIT(POWER_LIMIT4, POWER_LIMIT4_MASK, 0, > > + RAPL_DOMAIN_REG_PL4, POWER_UNIT, 0), > > PRIMITIVE_INFO_INIT(FW_LOCK, POWER_LOW_LOCK, 31, > > RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), > > PRIMITIVE_INFO_INIT(PL1_ENABLE, POWER_LIMIT1_ENABLE, 15, @@ > > -597,6 +632,8 @@ static u64 rapl_unit_xlate(struct rapl_domain *rd, enum > unit_type type, > > RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), > > PRIMITIVE_INFO_INIT(PL2_CLAMP, POWER_LIMIT2_CLAMP, 48, > > RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), > > + PRIMITIVE_INFO_INIT(PL4_ENABLE, POWER_LIMIT4_MASK, 0, > > + RAPL_DOMAIN_REG_PL4, ARBITRARY_UNIT, > > + 0), > > PRIMITIVE_INFO_INIT(TIME_WINDOW1, TIME_WINDOW1_MASK, 17, > > RAPL_DOMAIN_REG_LIMIT, TIME_UNIT, 0), > > PRIMITIVE_INFO_INIT(TIME_WINDOW2, TIME_WINDOW2_MASK, 49, > @@ > > -1252,6 +1289,7 @@ void rapl_remove_package(struct rapl_package *rp) > > if (find_nr_power_limit(rd) > 1) { > > rapl_write_data_raw(rd, PL2_ENABLE, 0); > > rapl_write_data_raw(rd, PL2_CLAMP, 0); > > + rapl_write_data_raw(rd, PL4_ENABLE, 0); > > } > > if (rd->id == RAPL_DOMAIN_PACKAGE) { > > rd_package = rd; @@ -1360,6 +1398,13 @@ static > > void power_limit_state_save(void) > > if (ret) > > rd->rpl[i].last_power_limit = 0; > > break; > > + case PL4_ENABLE: > > + ret = rapl_read_data_raw(rd, > > + POWER_LIMIT4, true, > > + > > &rd->rpl[i].last_power_limit); > > + if (ret) > > + rd->rpl[i].last_power_limit = 0; > > + break; > > } > > } > > } > > @@ -1390,6 +1435,11 @@ static void power_limit_state_restore(void) > > rapl_write_data_raw(rd, > > POWER_LIMIT2, > > rd->rpl[i].last_power_limit); > > break; > > + case PL4_ENABLE: > > + if (rd->rpl[i].last_power_limit) > > + rapl_write_data_raw(rd, > > POWER_LIMIT4, > > + rd->rpl[i].last_power_limit); > > + break; > > } > > } > > } > > diff --git a/drivers/powercap/intel_rapl_msr.c > > b/drivers/powercap/intel_rapl_msr.c > > index d5487965bdfe..83c76454623e 100644 > > --- a/drivers/powercap/intel_rapl_msr.c > > +++ b/drivers/powercap/intel_rapl_msr.c > > @@ -28,6 +28,7 @@ > > > > /* Local defines */ > > #define MSR_PLATFORM_POWER_LIMIT 0x0000065C > > +#define MSR_VR_CURRENT_CONFIG 0x00000601 > > > > /* private data for RAPL MSR Interface */ static struct rapl_if_priv > > rapl_msr_priv = { @@ -123,13 +124,27 @@ static int > > rapl_msr_write_raw(int cpu, struct reg_action *ra) > > return ra->err; > > } > > > > +/* List of verified CPUs. */ > > +static const struct x86_cpu_id pl4_support_ids[] = { > > + { X86_VENDOR_INTEL, 6, INTEL_FAM6_TIGERLAKE_L, > X86_FEATURE_ANY }, > > + {} > > +}; > > + > > static int rapl_msr_probe(struct platform_device *pdev) { > > int ret; > > + const struct x86_cpu_id *id = x86_match_cpu(pl4_support_ids); > > > > rapl_msr_priv.read_raw = rapl_msr_read_raw; > > rapl_msr_priv.write_raw = rapl_msr_write_raw; > > > > + if (id) { > > + rapl_msr_priv.limits[RAPL_DOMAIN_PACKAGE] = 3; > > + > rapl_msr_priv.regs[RAPL_DOMAIN_PACKAGE][RAPL_DOMAIN_REG_PL4] = > > + MSR_VR_CURRENT_CONFIG; > > + pr_info("PL4 support detected.\n"); > > + } > > + > > rapl_msr_priv.control_type = powercap_register_control_type(NULL, > "intel-rapl", NULL); > > if (IS_ERR(rapl_msr_priv.control_type)) { > > pr_debug("failed to register powercap control_type.\n"); > > diff --git a/include/linux/intel_rapl.h b/include/linux/intel_rapl.h > > index efb3ce892c20..3582176a1eca 100644 > > --- a/include/linux/intel_rapl.h > > +++ b/include/linux/intel_rapl.h > > @@ -29,6 +29,7 @@ enum rapl_domain_reg_id { > > RAPL_DOMAIN_REG_PERF, > > RAPL_DOMAIN_REG_POLICY, > > RAPL_DOMAIN_REG_INFO, > > + RAPL_DOMAIN_REG_PL4, > > RAPL_DOMAIN_REG_MAX, > > }; > > > > @@ -38,12 +39,14 @@ enum rapl_primitives { > > ENERGY_COUNTER, > > POWER_LIMIT1, > > POWER_LIMIT2, > > + POWER_LIMIT4, > > FW_LOCK, > > > > PL1_ENABLE, /* power limit 1, aka long term */ > > PL1_CLAMP, /* allow frequency to go below OS request */ > > PL2_ENABLE, /* power limit 2, aka short term, > > instantaneous */ > > PL2_CLAMP, > > + PL4_ENABLE, /* power limit 4, aka max peak power */ > > > > TIME_WINDOW1, /* long term */ > > TIME_WINDOW2, /* short term */ > > @@ -65,7 +68,7 @@ struct rapl_domain_data { > > unsigned long timestamp; > > }; > > > > -#define NR_POWER_LIMITS (2) > > +#define NR_POWER_LIMITS (3) > > struct rapl_power_limit { > > struct powercap_zone_constraint *constraint; > > int prim_id; /* primitive ID used to enable */ > > -- > > 1.7.9.5 > >