Add separate entry for Broadcom STB DPFE driver, selected by platforms
by default. This allows further customization and compile testing.
Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>
---
I have other changes around drivers/memory/Kconfig pending. Sending them
together would avoid conflicts.
---
arch/arm/mach-bcm/Kconfig | 1 +
arch/arm64/Kconfig.platforms | 1 +
drivers/memory/Kconfig | 11 +++++++++++
drivers/memory/Makefile | 2 +-
4 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 1df0ee01ee02..b0c45238e69b 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -208,6 +208,7 @@ config ARCH_BRCMSTB
select ARM_GIC
select ARM_ERRATA_798181 if SMP
select HAVE_ARM_ARCH_TIMER
+ select BRCMSTB_DPFE
select BRCMSTB_L2_IRQ
select BCM7120_L2_IRQ
select ARCH_HAS_HOLES_MEMORYMODEL
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index ddc3bf75257f..f7791ed0ed6d 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -68,6 +68,7 @@ config ARCH_BRCMSTB
bool "Broadcom Set-Top-Box SoCs"
select ARCH_HAS_RESET_CONTROLLER
select BCM7038_L1_IRQ
+ select BRCMSTB_DPFE
select BRCMSTB_L2_IRQ
select GENERIC_IRQ_CHIP
select PINCTRL
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index cd4fc93b50df..fef6f0873fda 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -54,6 +54,17 @@ config ATMEL_EBI
tree is used. This bus supports NANDs, external ethernet controller,
SRAMs, ATA devices, etc.
+config BRCMSTB_DPFE
+ bool "Broadcom STB DPFE driver" if COMPILE_TEST
+ depends on ARCH_BRCMSTB || COMPILE_TEST
+ help
+ This driver provides access to the DPFE interface of Broadcom
+ STB SoCs. The firmware running on the DCPU inside the DDR PHY can
+ provide current information about the system's RAM, for instance
+ the DRAM refresh rate. This can be used as an indirect indicator
+ for the DRAM's temperature. Slower refresh rate means cooler RAM,
+ higher refresh rate means hotter RAM.
+
config BT1_L2_CTL
bool "Baikal-T1 CM2 L2-RAM Cache Control Block"
depends on MIPS_BAIKAL_T1 || COMPILE_TEST
diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
index b4533ffff2bc..e71cf7b99641 100644
--- a/drivers/memory/Makefile
+++ b/drivers/memory/Makefile
@@ -10,7 +10,7 @@ endif
obj-$(CONFIG_ARM_PL172_MPMC) += pl172.o
obj-$(CONFIG_ATMEL_SDRAMC) += atmel-sdramc.o
obj-$(CONFIG_ATMEL_EBI) += atmel-ebi.o
-obj-$(CONFIG_ARCH_BRCMSTB) += brcmstb_dpfe.o
+obj-$(CONFIG_BRCMSTB_DPFE) += brcmstb_dpfe.o
obj-$(CONFIG_BT1_L2_CTL) += bt1-l2-ctl.o
obj-$(CONFIG_TI_AEMIF) += ti-aemif.o
obj-$(CONFIG_TI_EMIF) += emif.o
--
2.17.1
