From: Hans de Goede <hdego...@redhat.com> commit 0ceb8a36d023d4bb4ffca3474a452fb1dfaa0ef2 upstream.
The default mode for SSP configuration is TDM 4 slot and so far we were using this for the bus format on cht-bsw-rt56732 boards. One board, the Lenovo Miix 2 10 uses not 1 but 2 codecs connected to SSP2. The second piggy-backed, output-only codec is inside the keyboard-dock (which has extra speakers). Unlike the main rt5672 codec, we cannot configure this codec, it is hard coded to use 2 channel 24 bit I2S. Using 4 channel TDM leads to the dock speakers codec (which listens in on the data send from the SSP to the rt5672 codec) emiting horribly distorted sound. Since we only support 2 channels anyways, there is no need for TDM on any cht-bsw-rt5672 designs. So we can simply use I2S 2ch everywhere. This commit fixes the Lenovo Miix 2 10 dock speakers issue by changing the bus format set in cht_codec_fixup() to I2S 2 channel. This change has been tested on the following devices with a rt5672 codec: Lenovo Miix 2 10 Lenovo Thinkpad 8 Lenovo Thinkpad 10 (gen 1) Signed-off-by: Hans de Goede <hdego...@redhat.com> Cc: sta...@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786723 Link: https://lore.kernel.org/r/20200628155231.71089-2-hdego...@redhat.com Signed-off-by: Mark Brown <broo...@kernel.org> Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org> --- sound/soc/intel/boards/cht_bsw_rt5672.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) --- a/sound/soc/intel/boards/cht_bsw_rt5672.c +++ b/sound/soc/intel/boards/cht_bsw_rt5672.c @@ -253,21 +253,20 @@ static int cht_codec_fixup(struct snd_so params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); /* - * Default mode for SSP configuration is TDM 4 slot + * Default mode for SSP configuration is TDM 4 slot. One board/design, + * the Lenovo Miix 2 10 uses not 1 but 2 codecs connected to SSP2. The + * second piggy-backed, output-only codec is inside the keyboard-dock + * (which has extra speakers). Unlike the main rt5672 codec, we cannot + * configure this codec, it is hard coded to use 2 channel 24 bit I2S. + * Since we only support 2 channels anyways, there is no need for TDM + * on any cht-bsw-rt5672 designs. So we simply use I2S 2ch everywhere. */ - ret = snd_soc_dai_set_fmt(asoc_rtd_to_codec(rtd, 0), - SND_SOC_DAIFMT_DSP_B | - SND_SOC_DAIFMT_IB_NF | + ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0), + SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); if (ret < 0) { - dev_err(rtd->dev, "can't set format to TDM %d\n", ret); - return ret; - } - - /* TDM 4 slots 24 bit, set Rx & Tx bitmask to 4 active slots */ - ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_codec(rtd, 0), 0xF, 0xF, 4, 24); - if (ret < 0) { - dev_err(rtd->dev, "can't set codec TDM slot %d\n", ret); + dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret); return ret; }
