On Mon, 10 Aug 2020 07:24:47 +0200 Christian Eggers <cegg...@arri.de> wrote:
> The driver for the as73211 light sensor provides the following not yet > documented sysfs entries: > - in_intensity_(x|y|z)_raw > - in_intensity_(x|y|z)_scale > - in_intensity_sampling_frequency(_available) > - in_intensity_hardwaregain(_available) > - in_intensity_integration_time > > Signed-off-by: Christian Eggers <cegg...@arri.de> Applied. Thanks, Jonathan > --- > Jonathan Cameron: > > If it is shared across 'ALL' channels then it will be just integration_time > > If it is shared across all channels of a given type, it will be > > <type>_integration_time. > changed. > > Best regards > Christian Eggers > > Documentation/ABI/testing/sysfs-bus-iio | 26 ++++++++++++++++++++++++- > 1 file changed, 25 insertions(+), 1 deletion(-) > > diff --git a/Documentation/ABI/testing/sysfs-bus-iio > b/Documentation/ABI/testing/sysfs-bus-iio > index d3e53a6d8331..388560149875 100644 > --- a/Documentation/ABI/testing/sysfs-bus-iio > +++ b/Documentation/ABI/testing/sysfs-bus-iio > @@ -40,6 +40,7 @@ Description: > buffered samples and events for device X. > > What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency > +What: > /sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency > What: > /sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency > What: /sys/bus/iio/devices/triggerX/sampling_frequency > KernelVersion: 2.6.35 > @@ -55,6 +56,7 @@ Description: > then it is to be found in the base device directory. > > What: > /sys/bus/iio/devices/iio:deviceX/sampling_frequency_available > +What: > /sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency_available > What: > /sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available > What: /sys/.../iio:deviceX/buffer/sampling_frequency_available > What: > /sys/bus/iio/devices/triggerX/sampling_frequency_available > @@ -374,6 +376,9 @@ What: > /sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale > What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_scale > What: /sys/bus/iio/devices/iio:deviceX/in_countY_scale > What: /sys/bus/iio/devices/iio:deviceX/in_angl_scale > +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale > +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale > +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_z_scale > KernelVersion: 2.6.35 > Contact: linux-...@vger.kernel.org > Description: > @@ -484,6 +489,7 @@ Description: > are listed in this attribute. > > What /sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain > +What: > /sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain > What: > /sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain > What: > /sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain > What: > /sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain > @@ -494,6 +500,13 @@ Description: > Hardware applied gain factor. If shared across all channels, > <type>_hardwaregain is used. > > +What: > /sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain_available > +KernelVersion: 5.10 > +Contact: linux-...@vger.kernel.org > +Description: > + Lists all available hardware applied gain factors. Shared > across all > + channels. > + > What: /sys/.../in_accel_filter_low_pass_3db_frequency > What: /sys/.../in_magn_filter_low_pass_3db_frequency > What: /sys/.../in_anglvel_filter_low_pass_3db_frequency > @@ -1333,6 +1346,7 @@ Description: > standardised CIE Erythemal Action Spectrum. UV index values > range > from 0 (low) to >=11 (extreme). > > +What: /sys/.../iio:deviceX/in_intensity_integration_time > What: /sys/.../iio:deviceX/in_intensity_red_integration_time > What: /sys/.../iio:deviceX/in_intensity_green_integration_time > What: /sys/.../iio:deviceX/in_intensity_blue_integration_time > @@ -1342,7 +1356,8 @@ KernelVersion: 3.12 > Contact: linux-...@vger.kernel.org > Description: > This attribute is used to get/set the integration time in > - seconds. > + seconds. If shared across all channels of a given type, > + <type>_integration_time is used. > > What: > /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time > KernelVersion: 4.0 > @@ -1739,3 +1754,12 @@ KernelVersion: 5.5 > Contact: linux-...@vger.kernel.org > Description: > One of the following thermocouple types: B, E, J, K, N, R, S, T. > + > +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_raw > +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_raw > +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_z_raw > +KernelVersion: 5.10 > +Contact: linux-...@vger.kernel.org > +Description: > + Unscaled light intensity according to CIE 1931/DIN 5033 color > space. > + Units after application of scale are nano nanowatts per square > meter.
