Joonwoo Park wrote:
> IMHO even though netdevice is in the promiscuous mode, we should receive all 
> of ingress packets.
> This disable the vlan filtering feature when a vlan hw accel configured e1000 
> device goes into promiscuous mode.
> This make packets visible to sniffers though it's not vlan id of itself.
> Any check, comments will be appreciated.

Actually I think this patch removes a choice from the user.

Before this patch, the user can sniff all traffic by disabling vlans, or a
specific vlan only by leaving vlans on when going into promisc mode.

After this patch, the user has no choice but to sniff all vlans at all times.

I don't think that that is such a good improvement.

Auke


> Thanks.
> 
> Signed-off-by: Joonwoo Park <[EMAIL PROTECTED]>
> ---
>  drivers/net/e1000/e1000_main.c |   26 ++++++++++++++++++++------
>  1 files changed, 20 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c 
> index 72deff0..cdd5c84 100644
> --- a/drivers/net/e1000/e1000_main.c
> +++ b/drivers/net/e1000/e1000_main.c
> @@ -2424,7 +2424,7 @@ e1000_set_multi(struct net_device *netdev)
>       struct e1000_adapter *adapter = netdev_priv(netdev);
>       struct e1000_hw *hw = &adapter->hw;
>       struct dev_mc_list *mc_ptr;
> -     uint32_t rctl;
> +     uint32_t rctl, ctrl;
>       uint32_t hash_value;
>       int i, rar_entries = E1000_RAR_ENTRIES;
>       int mta_reg_count = (hw->mac_type == e1000_ich8lan) ?
> @@ -2441,14 +2441,25 @@ e1000_set_multi(struct net_device *netdev)
>       /* Check for Promiscuous and All Multicast modes */
>  
>       rctl = E1000_READ_REG(hw, RCTL);
> +     ctrl = E1000_READ_REG(&adapter->hw, CTRL);
>  
>       if (netdev->flags & IFF_PROMISC) {
>               rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
> -     } else if (netdev->flags & IFF_ALLMULTI) {
> -             rctl |= E1000_RCTL_MPE;
> -             rctl &= ~E1000_RCTL_UPE;
> +             if (adapter->hw.mac_type != e1000_ich8lan) {
> +                     if (ctrl & E1000_CTRL_VME)
> +                             rctl &= ~E1000_RCTL_VFE;
> +             }
>       } else {
> -             rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
> +             if (adapter->hw.mac_type != e1000_ich8lan) {
> +                     if (ctrl & E1000_CTRL_VME)
> +                             rctl |= E1000_RCTL_VFE;
> +             }
> +             if (netdev->flags & IFF_ALLMULTI) {
> +                     rctl |= E1000_RCTL_MPE;
> +                     rctl &= ~E1000_RCTL_UPE;
> +             } else {
> +                     rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
> +             }
>       }
>  
>       E1000_WRITE_REG(hw, RCTL, rctl);
> @@ -4952,7 +4963,10 @@ e1000_vlan_rx_register(struct net_device *netdev, 
> struct vlan_group *grp)
>               if (adapter->hw.mac_type != e1000_ich8lan) {
>                       /* enable VLAN receive filtering */
>                       rctl = E1000_READ_REG(&adapter->hw, RCTL);
> -                     rctl |= E1000_RCTL_VFE;
> +                     if (netdev->flags & IFF_PROMISC)
> +                             rctl &= ~E1000_RCTL_VFE;
> +                     else
> +                             rctl |= E1000_RCTL_VFE;
>                       rctl &= ~E1000_RCTL_CFIEN;
>                       E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
>                       e1000_update_mng_vlan(adapter);
> ---
> 
> -
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to