On Mon, Sep 07, 2020 at 02:41:47PM +1200, Chris Packham wrote:
> Per the datasheet the i2c functions use MPP_Sel=0x1. They are documented
> as using MPP_Sel=0x4 as well but mixing 0x1 and 0x4 is clearly wrong. On
> the board tested 0x4 resulted in a non-functioning i2c bus so stick with
> 0x1 which works.
>
> Fixes: d7ae8f8dee7f ("pinctrl: mvebu: pinctrl driver for 98DX3236 SoC")
> Signed-off-by: Chris Packham <chris.pack...@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <and...@lunn.ch>
Andrew
