On Nov 14, 2007 2:59 AM, Andrew Morton <[EMAIL PROTECTED]> wrote: > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.24-rc2/2.6.24-rc2-mm1/
Breaks nfsv4 in a rather funny way: treogen ~ # cd /usr/portage/x treogen x # touch bla touch: cannot touch `bla': File exists treogen x # mkdir bla treogen x # touch bla/bla touch: cannot touch `bla/bla': File exists treogen x # ls -lad * drwxr-xr-x 2 root root 6 Nov 14 20:03 bla treogen x # ls -la * total 0 drwxr-xr-x 2 root root 6 Nov 14 20:03 . drwxr-xr-x 3 root root 16 Nov 14 20:03 .. treogen x # So I can create new directories, but not new files. Reading files works normal. The client is 2.6.24-rc2-mm1, the server 2.6.22-gentoo-r9. The fstab-line from the client: 192.168.2.4:/portage /usr/portage nfs4 rw,noatime,nodiratime,intr 0 0 2.6.23-mm1 as client worked, some 2.6.24-rc1-git? also. Otherwise the new -mm worked OK for me, no errors visible in the syslog. It even fixed the ACPI Exception from regression bug 9320. Now the output is: [ 83.125873] scsi8 : pata_amd [ 83.125917] scsi9 : pata_amd [ 83.127062] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 83.127064] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 83.194917] ata9.01: ATA-7: Maxtor 6L250R0, BAH41G10, max UDMA/133 [ 83.194920] ata9.01: 490234752 sectors, multi 16: LBA48 [ 83.194929] ata9: nv_mode_filter: 0x7f39f&0x701f->0x701f, BIOS=0x7000 (0xc00000) ACPI=0x701f (900:60:0x14) [ 83.197327] ata9.01: configured for UDMA/33 [ 83.197348] ata10: port disabled. ignoring. [ 83.197428] scsi 8:0:1:0: Direct-Access ATA Maxtor 6L250R0 BAH4 PQ: 0 ANSI: 5 [ 83.197487] sd 8:0:1:0: [sdd] 490234752 512-byte hardware sectors (251000 MB) [ 83.197496] sd 8:0:1:0: [sdd] Write Protect is off [ 83.197498] sd 8:0:1:0: [sdd] Mode Sense: 00 3a 00 00 [ 83.197510] sd 8:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 83.197542] sd 8:0:1:0: [sdd] 490234752 512-byte hardware sectors (251000 MB) [ 83.197549] sd 8:0:1:0: [sdd] Write Protect is off [ 83.197551] sd 8:0:1:0: [sdd] Mode Sense: 00 3a 00 00 [ 83.197562] sd 8:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 83.197565] sdd: sdd1 sdd2 sdd3 sdd4 < sdd5 sdd6 > [ 83.222911] sd 8:0:1:0: [sdd] Attached SCSI disk [ 83.222944] sd 8:0:1:0: Attached scsi generic sg3 type 0 Just posting this, if someone is interested in the nv_mode_filter-output... (UDMA/33 is correct, its only a 40-wire cable) Torsten - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/