Update the B53 driver to support VLANs while not filtering. This
requires us to enable VLAN globally within the switch upon driver
initial configuration (dev->vlan_enabled).

We also need to remove the code that dealt with PVID re-configuration in
b53_vlan_filtering() since that function worked under the assumption
that it would only be called to make a bridge VLAN filtering, or not
filtering, and we would attempt to move the port's PVID accordingly.

Now that VLANs are programmed all the time, even in the case of a
non-VLAN filtering bridge, we would be programming a default_pvid for
the bridged switch ports.

Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 23 ++++-------------------
 1 file changed, 4 insertions(+), 19 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 6a5796c32721..46ac8875f870 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1377,23 +1377,6 @@ EXPORT_SYMBOL(b53_phylink_mac_link_up);
 int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering)
 {
        struct b53_device *dev = ds->priv;
-       u16 pvid, new_pvid;
-
-       b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid);
-       if (!vlan_filtering) {
-               /* Filtering is currently enabled, use the default PVID since
-                * the bridge does not expect tagging anymore
-                */
-               dev->ports[port].pvid = pvid;
-               new_pvid = b53_default_pvid(dev);
-       } else {
-               /* Filtering is currently disabled, restore the previous PVID */
-               new_pvid = dev->ports[port].pvid;
-       }
-
-       if (pvid != new_pvid)
-               b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port),
-                           new_pvid);
 
        b53_enable_vlan(dev, dev->vlan_enabled, vlan_filtering);
 
@@ -1444,7 +1427,7 @@ void b53_vlan_add(struct dsa_switch *ds, int port,
                        untagged = true;
 
                vl->members |= BIT(port);
-               if (untagged && !dsa_is_cpu_port(ds, port))
+               if (untagged)
                        vl->untag |= BIT(port);
                else
                        vl->untag &= ~BIT(port);
@@ -1482,7 +1465,7 @@ int b53_vlan_del(struct dsa_switch *ds, int port,
                if (pvid == vid)
                        pvid = b53_default_pvid(dev);
 
-               if (untagged && !dsa_is_cpu_port(ds, port))
+               if (untagged)
                        vl->untag &= ~(BIT(port));
 
                b53_set_vlan_entry(dev, vid, vl);
@@ -2619,6 +2602,8 @@ struct b53_device *b53_switch_alloc(struct device *base,
        dev->priv = priv;
        dev->ops = ops;
        ds->ops = &b53_switch_ops;
+       ds->configure_vlan_while_not_filtering = true;
+       dev->vlan_enabled = ds->configure_vlan_while_not_filtering;
        mutex_init(&dev->reg_mutex);
        mutex_init(&dev->stats_mutex);
 
-- 
2.25.1

Reply via email to