Ben, Adrian,
On Mon, Sep 14, 2020 at 11:08:14AM +0300, Adrian Hunter wrote:
> On 14/09/20 9:40 am, AKASHI Takahiro wrote:
> > Adrian,
> >
> > On Fri, Aug 21, 2020 at 05:09:01PM +0300, Adrian Hunter wrote:
> >> On 10/07/20 2:11 pm, Ben Chuang wrote:
> >>> From: AKASHI Takahiro <[email protected]>
> >>>
> >>> sdhci_start_signal_voltage_switch() should be called only in UHS-I mode,
> >>> and not for UHS-II mode.
> >>>
> >>> Signed-off-by: Ben Chuang <[email protected]>
> >>> Signed-off-by: AKASHI Takahiro <[email protected]>
> >>> ---
> >>> drivers/mmc/host/sdhci.c | 7 ++++++-
> >>> 1 file changed, 6 insertions(+), 1 deletion(-)
> >>>
> >>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> >>> index 5511649946b9..7f2537648a08 100644
> >>> --- a/drivers/mmc/host/sdhci.c
> >>> +++ b/drivers/mmc/host/sdhci.c
> >>> @@ -2623,8 +2623,13 @@ int sdhci_start_signal_voltage_switch(struct
> >>> mmc_host *mmc,
> >>> /*
> >>> * Signal Voltage Switching is only applicable for Host Controllers
> >>> * v3.00 and above.
> >>> + * But for UHS2, the signal voltage is supplied by vdd2 which is
> >>> + * already 1.8v so no voltage switch required.
I have been confused with this comment.
(I know it came from the original Intel code, not from Ben.)
If this comment is true,
> >>> */
> >>> - if (host->version < SDHCI_SPEC_300)
> >>> + if (host->version < SDHCI_SPEC_300 ||
> >>> + (IS_ENABLED(CONFIG_MMC_SDHCI_UHS2) &&
> >>> + host->version >= SDHCI_SPEC_400 &&
> >>> + host->mmc->flags & MMC_UHS2_SUPPORT))
the condition above must be wrong since 'flags & MMC_UHS2_SUPPORT'
is one of capabilities for a host controller, not a card
while the selection of voltage depends on a card type.
So I wonder why this code still works.
I guess that it is because set_signal_voltage(), or other variant functions,
will never be called for UHS-II cards under the current implementation.
Looking at mmc_sd_init_card(), we have added some hack:
mmc_sd_init_card()
{
...
/* For UHS2, skip the UHS-I initialization. */
if ((host->flags & MMC_UHS2_SUPPORT) &&
(host->flags & MMC_UHS2_INITIALIZED))
goto done;
...
if (mmc_sd_card_using_v18(card)) {
if (mmc_host_set_uhs_voltage(host) ||
mmc_sd_init_uhs_card(card)) {
...
}
Ben, can you confirm this?
(There is another callsite of mmc_host_set_uhs_voltage() though.)
> >> Please look at hooking ->start_signal_voltage_switch() instead
> >
> > Do you mean that you want every platform driver who wants to support UHS-II
> > to set NULL to start_signal_voltage_switch hook even if this hack is
> > platform agnostic?
>
> No, I see UHS-II as a separate layer i.e.
>
> UHS-II host controller driver
> | |
> | v
> | sdhci-uhs2 e.g. sdhci_uhs2_start_signal_voltage_switch
> | |
> v v
> sdhci e.g. sdhci_start_signal_voltage_switch
>
> Most things should go through sdhci-uhs2 but not nessarily everything.
What I meant by my previous comment is that we don't have to
call any function, sdhci_uhs2_start_signal_voltage_switch in above example,
for UHS-II cards in any case since it is always simply empty.
-Takahiro Akashi
