Reviewed-by: Saravana Kannan <sarava...@google.com> to all 3 patches in the series.
-Saravana On Tue, Aug 25, 2020 at 10:01 AM Georgi Djakov <georgi.dja...@linaro.org> wrote: > > Bootloaders often leave some system resources enabled such as clocks, > regulators, interconnects etc. We want to keep these resources enabled > until all their consumers are probed. These resources are often shared, > so we must wait for all the consumers to come up, before deciding > whether to turn them off or change the configuration. This patchset is > trying to solve the above problem just for the on-chip interconnects. > > The problem is solved by allowing the providers to implement the get_bw() > function which should return the current average/peak bandwidth. These are > used as floor values, that are enforced during boot while the requests from > all consumers are being collected. Then the sync_state() callback is used > to signal that all consumers have been probed, meaning that the floor > bandwidth is not needed anymore and the framework is ready to re-aggregate > and process all requests. If get_bw() is not implemented, the framework > will use INT_MAX as default bandwidth value. > > v3: > * Go back to introducing the get_bw() function as in v1. (Saravana) > * If querying the current bandwidth is not supported, max out the > bandwidth. (Saravana) > * Use icc_sync_state also for sc7180. > > v2: https://lore.kernel.org/r/20200722110139.24778-1-georgi.dja...@linaro.org/ > * Support initial values for both average and peak bandwidth (Mike) > * Skip aggregating/setting for nodes that don't specify initial bw (Mike) > * Drop patch 2/4: Add get_bw() callback (Mike) > * Squash patches 3 and 4. > > v1: > https://lore.kernel.org/lkml/20200709110705.30359-1-georgi.dja...@linaro.org/ > > Georgi Djakov (3): > interconnect: Add get_bw() callback > interconnect: Add sync state support > interconnect: qcom: Use icc_sync_state > > drivers/interconnect/core.c | 67 +++++++++++++++++++++++++++ > drivers/interconnect/qcom/osm-l3.c | 1 + > drivers/interconnect/qcom/sc7180.c | 1 + > drivers/interconnect/qcom/sdm845.c | 1 + > include/linux/interconnect-provider.h | 7 +++ > 5 files changed, 77 insertions(+) >
