Hi Leo, Rob,

On Tuesday, September 22, 2020 6:20 AM, Leo Li wrote:
> 
> > -----Original Message-----
> > From: Ran Wang <ran.wan...@nxp.com>
> > Sent: Wednesday, September 16, 2020 3:18 AM
> > To: Leo Li <leoyang...@nxp.com>; Rob Herring <robh...@kernel.org>;
> > Shawn Guo <shawn...@kernel.org>
> > Cc: linuxppc-...@lists.ozlabs.org;
> > linux-arm-ker...@lists.infradead.org;
> > devicet...@vger.kernel.org; linux-kernel@vger.kernel.org; Biwen Li
> > <biwen...@nxp.com>; Ran Wang <ran.wan...@nxp.com>
> > Subject: [PATCH 1/5] Documentation: dt: binding: fsl: Add
> > 'fsl,ippdexpcr1-alt- addr' property
> >
> > From: Biwen Li <biwen...@nxp.com>
> >
> > The 'fsl,ippdexpcr1-alt-addr' property is used to handle an errata
> > A-008646 on LS1021A
> 
> It looks like the previous version of this patch has gotten the reviewed-by 
> from
> Rob.  It would be good to be added to the patch for new submission.

Actually this patch has one update from previous version 
(https://lore.kernel.org/patchwork/patch/1161631/):
Reduce entry number from 3 to 2.

So I'd like to have a review for this one, sorry for not highlight this in 
advance.

Regards,
Ran

> >
> > Signed-off-by: Biwen Li <biwen...@nxp.com>
> > Signed-off-by: Ran Wang <ran.wan...@nxp.com>
> > ---
> >  Documentation/devicetree/bindings/soc/fsl/rcpm.txt | 19
> > +++++++++++++++++++
> >  1 file changed, 19 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> > b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> > index 5a33619..1be58a3 100644
> > --- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> > +++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> > @@ -34,6 +34,11 @@ Chassis Version          Example Chips
> >  Optional properties:
> >   - little-endian : RCPM register block is Little Endian. Without it RCPM
> >     will be Big Endian (default case).
> > + - fsl,ippdexpcr1-alt-addr : The property is related to a hardware issue
> > +   on SoC LS1021A and only needed on SoC LS1021A.
> > +   Must include 2 entries:
> > +   The first entry must be a link to the SCFG device node.
> > +   The 2nd entry must be offset of register IPPDEXPCR1 in SCFG.
> >
> >  Example:
> >  The RCPM node for T4240:
> > @@ -43,6 +48,20 @@ The RCPM node for T4240:
> >             #fsl,rcpm-wakeup-cells = <2>;
> >     };
> >
> > +The RCPM node for LS1021A:
> > +   rcpm: rcpm@1ee2140 {
> > +           compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
> > +           reg = <0x0 0x1ee2140 0x0 0x8>;
> > +           #fsl,rcpm-wakeup-cells = <2>;
> > +
> > +           /*
> > +            * The second and third entry compose an alt offset
> > +            * address for IPPDEXPCR1(SCFG_SPARECR8)
> > +            */
> > +           fsl,ippdexpcr1-alt-addr = <&scfg 0x51c>;
> > +   };
> > +
> > +
> >  * Freescale RCPM Wakeup Source Device Tree Bindings
> >  -------------------------------------------
> >  Required fsl,rcpm-wakeup property should be added to a device node if
> > the device
> > --
> > 2.7.4

Reply via email to