Similar to the gpio groups in main domain, there is one gpio group in
wakeup domain with 2 mdoules instances in it. The gpio group pins out
73 pins (5 banks). Add DT nodes for these 2 gpio module instances.
Signed-off-by: Faiz Abbas <faiz_ab...@ti.com>
---
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 32 +++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index eb2a78a53512..5ee64d4ee41f 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -107,6 +107,38 @@
ti,interrupt-ranges = <16 960 16>;
};
+ wkup_gpio0: gpio@42110000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x42110000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&wkup_gpio_intr>;
+ interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <73>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 113 0>;
+ clock-names = "gpio";
+ };
+
+ wkup_gpio1: gpio@42100000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x42100000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&wkup_gpio_intr>;
+ interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <73>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 114 0>;
+ clock-names = "gpio";
+ };
+
mcu_navss: bus@28380000 {
compatible = "simple-mfd";
#address-cells = <2>;
--
2.17.1
