On 00:35-20201002, Faiz Abbas wrote: > The following patches add support for UHS modes for TI's j721e and j7200 > boards. > > Patches 1-3 add support for gpios to j7200-evm > > Patches 4-6 add support for voltage regulators for required by the > SD card in both devices as well as enable UHS modes at 1.8V > > Patches 5-6 add some required configs to the arm64 defconfig. > > This series depends on driver patches adding tuning support here: > https://lore.kernel.org/linux-arm-kernel/20200923105206.7988-1-faiz_ab...@ti.com/ > > Faiz Abbas (8): > arm64: dts: ti: k3-j7200-main: Add gpio nodes in main domain > arm64: dts: ti: k3-j7200: Add gpio nodes in wakeup domain > arm64: dts: ti: k3-j7200-common-proc-board: Disable unused gpio > modules > arm64: dts: ti: k3-j721e-main: Add output tap delay values > arm64: dts: ti: k3-j721e-common-proc-board: Add support SD card UHS > modes > arm64: dts: ti: k3-j7200-common-proc-board: Add support SD card UHS > modes
Split these up please! > arm64: defconfig: Enable OMAP I2C driver > arm64: defconfig: Enable DAVINCI_GPIO driver > defconfig patches can be posted independent of dts patches, they go to different branches. Also, These are a little too late for 5.10 at this point. > .../dts/ti/k3-j7200-common-proc-board.dts | 48 +++++++++++++ > arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 69 ++++++++++++++++++- > .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 32 +++++++++ > .../dts/ti/k3-j721e-common-proc-board.dts | 35 +++++++++- > arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 22 ++++-- > arch/arm64/configs/defconfig | 2 + > 6 files changed, 201 insertions(+), 7 deletions(-) > > -- > 2.17.1 > -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
