<diff in v1 to v2 , addressed formatting and simplified logic >
For particular codec HWs have requirement to
toggle interrupt clear register twice 0->1->0.
To accommodate it, need to add one more field
(clear_ack) in the regmap_irq struct and update
regmap-irq driver to support it.
Signed-off-by: Laxminath Kasam <[email protected]>
---
drivers/base/regmap/regmap-irq.c | 33 ++++++++++++++++++++++++++++++++-
include/linux/regmap.h | 2 ++
2 files changed, 34 insertions(+), 1 deletion(-)
diff --git a/drivers/base/regmap/regmap-irq.c
b/drivers/base/regmap/regmap-irq.c
index 369a57e..ad5c2de 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -168,6 +168,14 @@ static void regmap_irq_sync_unlock(struct irq_data
*data)
ret = regmap_write(map, reg, ~d->mask_buf[i]);
else
ret = regmap_write(map, reg, d->mask_buf[i]);
+ if (d->chip->clear_ack) {
+ if (d->chip->ack_invert && !ret)
+ ret = regmap_write(map, reg,
+ d->mask_buf[i]);
+ else if (!ret)
+ ret = regmap_write(map, reg,
+ ~d->mask_buf[i]);
+ }
if (ret != 0)
dev_err(d->map->dev, "Failed to ack 0x%x: %d\n",
reg, ret);
@@ -493,7 +501,20 @@ static irqreturn_t regmap_irq_thread(int irq, void
*d)
if (data->status_buf[i] && (chip->ack_base || chip->use_ack)) {
reg = chip->ack_base +
(i * map->reg_stride * data->irq_reg_stride);
- ret = regmap_write(map, reg, data->status_buf[i]);
+ if (chip->ack_invert)
+ ret = regmap_write(map, reg,
+ ~data->status_buf[i]);
+ else
+ ret = regmap_write(map, reg,
+ data->status_buf[i]);
+ if (chip->clear_ack) {
+ if (chip->ack_invert && !ret)
+ ret = regmap_write(map, reg,
+ data->status_buf[i]);
+ else if (!ret)
+ ret = regmap_write(map, reg,
+ ~data->status_buf[i]);
+ }
if (ret != 0)
dev_err(map->dev, "Failed to ack 0x%x: %d\n",
reg, ret);
@@ -722,6 +743,16 @@ int regmap_add_irq_chip_fwnode(struct fwnode_handle
*fwnode,
else
ret = regmap_write(map, reg,
d->status_buf[i] & d->mask_buf[i]);
+ if (chip->clear_ack) {
+ if (chip->ack_invert && !ret)
+ ret = regmap_write(map, reg,
+ (d->status_buf[i] &
+ d->mask_buf[i]));
+ else if (!ret)
+ ret = regmap_write(map, reg,
+ ~(d->status_buf[i] &
+ d->mask_buf[i]));
+ }
if (ret != 0) {
dev_err(map->dev, "Failed to ack 0x%x: %d\n",
reg, ret);
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 1970ed5..0701671 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -1305,6 +1305,7 @@ struct regmap_irq_sub_irq_map {
* @mask_invert: Inverted mask register: cleared bits are masked out.
* @use_ack: Use @ack register even if it is zero.
* @ack_invert: Inverted ack register: cleared bits for ack.
+ * @clear_ack: Use this to set 1 and 0 or vice-versa to clear
interrupts.
* @wake_invert: Inverted wake register: cleared bits are wake enabled.
* @type_invert: Invert the type flags.
* @type_in_mask: Use the mask registers for controlling irq type. For
@@ -1353,6 +1354,7 @@ struct regmap_irq_chip {
bool mask_invert:1;
bool use_ack:1;
bool ack_invert:1;
+ bool clear_ack:1;
bool wake_invert:1;
bool runtime_pm:1;
bool type_invert:1;
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center,
Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative
Project.From 822d819c8d538b0323709eefc41e88d062b349ee Mon Sep 17 00:00:00 2001
From: Laxminath Kasam <[email protected]>
Date: Wed, 23 Sep 2020 18:42:36 +0530
Subject: [PATCH v2] regmap: irq: Add support to clear ack registers
For particular codec HWs have requirement to
toggle interrupt clear register twice 0->1->0.
To accommodate it, need to add one more field
(clear_ack) in the regmap_irq struct and update
regmap-irq driver to support it.
Signed-off-by: Laxminath Kasam <[email protected]>
---
drivers/base/regmap/regmap-irq.c | 33 ++++++++++++++++++++++++++++++++-
include/linux/regmap.h | 2 ++
2 files changed, 34 insertions(+), 1 deletion(-)
diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index 369a57e..ad5c2de 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -168,6 +168,14 @@ static void regmap_irq_sync_unlock(struct irq_data *data)
ret = regmap_write(map, reg, ~d->mask_buf[i]);
else
ret = regmap_write(map, reg, d->mask_buf[i]);
+ if (d->chip->clear_ack) {
+ if (d->chip->ack_invert && !ret)
+ ret = regmap_write(map, reg,
+ d->mask_buf[i]);
+ else if (!ret)
+ ret = regmap_write(map, reg,
+ ~d->mask_buf[i]);
+ }
if (ret != 0)
dev_err(d->map->dev, "Failed to ack 0x%x: %d\n",
reg, ret);
@@ -493,7 +501,20 @@ static irqreturn_t regmap_irq_thread(int irq, void *d)
if (data->status_buf[i] && (chip->ack_base || chip->use_ack)) {
reg = chip->ack_base +
(i * map->reg_stride * data->irq_reg_stride);
- ret = regmap_write(map, reg, data->status_buf[i]);
+ if (chip->ack_invert)
+ ret = regmap_write(map, reg,
+ ~data->status_buf[i]);
+ else
+ ret = regmap_write(map, reg,
+ data->status_buf[i]);
+ if (chip->clear_ack) {
+ if (chip->ack_invert && !ret)
+ ret = regmap_write(map, reg,
+ data->status_buf[i]);
+ else if (!ret)
+ ret = regmap_write(map, reg,
+ ~data->status_buf[i]);
+ }
if (ret != 0)
dev_err(map->dev, "Failed to ack 0x%x: %d\n",
reg, ret);
@@ -722,6 +743,16 @@ int regmap_add_irq_chip_fwnode(struct fwnode_handle *fwnode,
else
ret = regmap_write(map, reg,
d->status_buf[i] & d->mask_buf[i]);
+ if (chip->clear_ack) {
+ if (chip->ack_invert && !ret)
+ ret = regmap_write(map, reg,
+ (d->status_buf[i] &
+ d->mask_buf[i]));
+ else if (!ret)
+ ret = regmap_write(map, reg,
+ ~(d->status_buf[i] &
+ d->mask_buf[i]));
+ }
if (ret != 0) {
dev_err(map->dev, "Failed to ack 0x%x: %d\n",
reg, ret);
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 1970ed5..0701671 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -1305,6 +1305,7 @@ struct regmap_irq_sub_irq_map {
* @mask_invert: Inverted mask register: cleared bits are masked out.
* @use_ack: Use @ack register even if it is zero.
* @ack_invert: Inverted ack register: cleared bits for ack.
+ * @clear_ack: Use this to set 1 and 0 or vice-versa to clear interrupts.
* @wake_invert: Inverted wake register: cleared bits are wake enabled.
* @type_invert: Invert the type flags.
* @type_in_mask: Use the mask registers for controlling irq type. For
@@ -1353,6 +1354,7 @@ struct regmap_irq_chip {
bool mask_invert:1;
bool use_ack:1;
bool ack_invert:1;
+ bool clear_ack:1;
bool wake_invert:1;
bool runtime_pm:1;
bool type_invert:1;
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
