With threadirqs, stmmac_interrupt() is called on a thread with hardirqs
enabled so we cannot call __napi_schedule_irqoff().  Under lockdep it
leads to:

        ------------[ cut here ]------------
        WARNING: CPU: 0 PID: 285 at kernel/softirq.c:598 
__raise_softirq_irqoff+0x6c/0x1c8
        IRQs not disabled as expected
        Modules linked in: brcmfmac hci_uart btbcm cfg80211 brcmutil
        CPU: 0 PID: 285 Comm: irq/41-eth0 Not tainted 5.4.69-rt39 #1
        Hardware name: Rockchip (Device Tree)
        [<c0110d3c>] (unwind_backtrace) from [<c010c284>] (show_stack+0x10/0x14)
        [<c010c284>] (show_stack) from [<c0855504>] (dump_stack+0xa8/0xe0)
        [<c0855504>] (dump_stack) from [<c0120a9c>] (__warn+0xe0/0xfc)
        [<c0120a9c>] (__warn) from [<c0120e80>] (warn_slowpath_fmt+0x7c/0xa4)
        [<c0120e80>] (warn_slowpath_fmt) from [<c01278c8>] 
(__raise_softirq_irqoff+0x6c/0x1c8)
        [<c01278c8>] (__raise_softirq_irqoff) from [<c056bccc>] 
(stmmac_interrupt+0x388/0x4e0)
        [<c056bccc>] (stmmac_interrupt) from [<c0178714>] 
(irq_forced_thread_fn+0x28/0x64)
        [<c0178714>] (irq_forced_thread_fn) from [<c0178924>] 
(irq_thread+0x124/0x260)
        [<c0178924>] (irq_thread) from [<c0142ee8>] (kthread+0x154/0x164)
        [<c0142ee8>] (kthread) from [<c01010bc>] (ret_from_fork+0x14/0x38)
        Exception stack(0xeb7b5fb0 to 0xeb7b5ff8)
        5fa0:                                     00000000 00000000 00000000 
00000000
        5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
00000000
        5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
        irq event stamp: 48
        hardirqs last  enabled at (50): [<c085c200>] prb_unlock+0x7c/0x8c
        hardirqs last disabled at (51): [<c085c0dc>] prb_lock+0x58/0x100
        softirqs last  enabled at (0): [<c011e770>] copy_process+0x550/0x1654
        softirqs last disabled at (25): [<c01786ec>] 
irq_forced_thread_fn+0x0/0x64
        ---[ end trace 0000000000000002 ]---

Use __napi_schedule() instead which will save & restore the interrupt
state.

Fixes: 4ccb45857c2c ("net: stmmac: Fix NAPI poll in TX path when in 
multi-queue")
Signed-off-by: John Keeping <j...@metanate.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c 
b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 220626a8d499..c331b829f60a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2145,7 +2145,7 @@ static int stmmac_napi_check(struct stmmac_priv *priv, 
u32 chan)
                        spin_lock_irqsave(&ch->lock, flags);
                        stmmac_disable_dma_irq(priv, priv->ioaddr, chan, 1, 0);
                        spin_unlock_irqrestore(&ch->lock, flags);
-                       __napi_schedule_irqoff(&ch->rx_napi);
+                       __napi_schedule(&ch->rx_napi);
                }
        }
 
@@ -2154,7 +2154,7 @@ static int stmmac_napi_check(struct stmmac_priv *priv, 
u32 chan)
                        spin_lock_irqsave(&ch->lock, flags);
                        stmmac_disable_dma_irq(priv, priv->ioaddr, chan, 0, 1);
                        spin_unlock_irqrestore(&ch->lock, flags);
-                       __napi_schedule_irqoff(&ch->tx_napi);
+                       __napi_schedule(&ch->tx_napi);
                }
        }
 
-- 
2.28.0

Reply via email to