Hi Gene,
On 10/7/20 3:42 AM, Gene Chen wrote:
From: Gene Chen <gene_c...@richtek.com>
Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode,
3-channel RGB LED support Register/Flash/Breath Mode, and 1-channel for
moonlight LED.
Signed-off-by: Gene Chen <gene_c...@richtek.com>
---
drivers/leds/Kconfig | 12 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-mt6360.c | 783 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 796 insertions(+)
create mode 100644 drivers/leds/leds-mt6360.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 1c181df..c7192dd 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -271,6 +271,18 @@ config LEDS_MT6323
This option enables support for on-chip LED drivers found on
Mediatek MT6323 PMIC.
+config LEDS_MT6360
+ tristate "LED Support for Mediatek MT6360 PMIC"
+ depends on LEDS_CLASS_FLASH && OF
+ depends on LEDS_CLASS_MULTICOLOR
Since CONFIG_LED_CLASS_MULTICOLOR can be turned off you need to have
below instead:
depends on LEDS_CLASS_MULTICOLOR || !!LEDS_CLASS_MULTICOLOR
Unless you want to prevent enabling the driver without RGB LED,
but that does not seem to be reasonable at first glance.
+ depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
+ depends on MFD_MT6360
+ help
+ This option enables support for dual Flash LED drivers found on
+ Mediatek MT6360 PMIC.
+ Independent current sources supply for each flash LED support torch
+ and strobe mode.
+
--
Best regards,
Jacek Anaszewski
