> Yes, it's well hidden but it's there. If the profile is made custom, then > the p-states can be selected and "custom" default enables C6 but not C3 > (there is a note saying that it's not recommended for that CPU). If I > then switch it back to the normal profile, the c-states are not restored > so this is a one-way trip even if you disable the c-state in custom, > reboot, switch back, reboot. Same if the machine is reset to "optimal > default settings". Yey for BIOS developers. > > This means I have a limited number of attempts to do something about > this. 2 machines can no longer reproduce the problem reliably. >
Turns out I didn't even have that. On another machine (same model, same cpu, different BIOS that cannot be updated), enabling the C6 state still did not enable it on boot and dmesg complained about CST not being usable. This is weird because one would expect that if CST was unusable that it would be the same as use_acpi == false. This could potentially be if the ACPI tables are unsuitable due to bad bad FFH information for a lower c-state. If _CST is not found or usable, should acpi_state_table.count be reset to go back to the old behaviour? diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index 13600c403035..3b84f8631b40 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -1261,6 +1261,7 @@ static bool intel_idle_acpi_cst_extract(void) return true; } + acpi_state_table.count = 0; pr_debug("ACPI _CST not found or not usable\n"); return false; } -- Mel Gorman SUSE Labs