> From: Franck Lenormand (OSS) <franck.lenorm...@oss.nxp.com>
> Sent: Tuesday, July 21, 2020 11:21 PM
> Subject: [PATCH v2 1/5] firmware: imx: scu-seco: Add SEcure Controller APIS

Is 'Secure' intended? Not 'Secure'?

> 
> This patch adds the APIs:
>  - imx_sc_seco_build_info: get commit and sha of SECO
>  - imx_sc_seco_secvio_enable: enable SNVS IRQ handling
>  - imx_sc_seco_secvio_config: configure SNVS register
>  - imx_sc_seco_secvio_dgo_config: configure SNVS DGO register
> 
> Signed-off-by: Franck LENORMAND <franck.lenorm...@oss.nxp.com>
> ---
>  drivers/firmware/imx/Makefile         |   2 +-
>  drivers/firmware/imx/imx-scu.c        |   3 +
>  drivers/firmware/imx/seco.c           | 275
> ++++++++++++++++++++++++++++++++++
>  include/linux/firmware/imx/ipc.h      |   1 +
>  include/linux/firmware/imx/sci.h      |   1 +
>  include/linux/firmware/imx/svc/seco.h |  73 +++++++++
>  6 files changed, 354 insertions(+), 1 deletion(-)  create mode 100644
> drivers/firmware/imx/seco.c  create mode 100644
> include/linux/firmware/imx/svc/seco.h
> 
> diff --git a/drivers/firmware/imx/Makefile b/drivers/firmware/imx/Makefile
> index b76acba..f23e2b0 100644
> --- a/drivers/firmware/imx/Makefile
> +++ b/drivers/firmware/imx/Makefile
> @@ -1,4 +1,4 @@
>  # SPDX-License-Identifier: GPL-2.0
>  obj-$(CONFIG_IMX_DSP)                += imx-dsp.o
> -obj-$(CONFIG_IMX_SCU)                += imx-scu.o misc.o imx-scu-irq.o rm.o
> imx-scu-soc.o
> +obj-$(CONFIG_IMX_SCU)                += imx-scu.o misc.o imx-scu-irq.o rm.o
> imx-scu-soc.o seco.o
>  obj-$(CONFIG_IMX_SCU_PD)     += scu-pd.o
> diff --git a/drivers/firmware/imx/imx-scu.c b/drivers/firmware/imx/imx-scu.c
> index dca79ca..ed7b87b 100644
> --- a/drivers/firmware/imx/imx-scu.c
> +++ b/drivers/firmware/imx/imx-scu.c
> @@ -245,6 +245,9 @@ int imx_scu_call_rpc(struct imx_sc_ipc *sc_ipc, void
> *msg, bool have_resp)
>                       (saved_func == IMX_SC_MISC_FUNC_UNIQUE_ID ||
>                        saved_func == IMX_SC_MISC_FUNC_GET_BUTTON_STATUS))
>                       ret = 0;
> +             if (saved_svc == IMX_SC_RPC_SVC_SECO &&
> +                 saved_func == IMX_SC_SECO_FUNC_BUILD_INFO)
> +                     ret = 0;
>       }

Pls combined into the previous if statement.

> 
>  out:
> diff --git a/drivers/firmware/imx/seco.c b/drivers/firmware/imx/seco.c new 
> file
> mode 100644 index 0000000..9047a75
> --- /dev/null
> +++ b/drivers/firmware/imx/seco.c
> @@ -0,0 +1,275 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2020 NXP
> + *
> + * File containing client-side RPC functions for the SECO service.
> +These
> + * functions are ported to clients that communicate to the SC.
> + */
> +
> +#include <linux/firmware/imx/sci.h>
> +
> +struct imx_sc_msg_seco_get_build_id {
> +     struct imx_sc_rpc_msg hdr;
> +     u32 version;
> +     u32 commit;
> +};
> +
> +/**
> + * imx_sc_seco_build_info() - Get version and coomit ID of the SECO

s/coomit/commit

> + *
> + * @ipc: IPC handle
> + * @version: Version of the SECO
> + * @commit: Commit ID of the SECO
> + *
> + * Return:
> + * 0 - OK
> + * < 0 - error.

Can we follow the exist style?
@return Returns 0 for success and < 0 for errors

> + */
> +int imx_sc_seco_build_info(struct imx_sc_ipc *ipc, uint32_t *version,
> +                        uint32_t *commit)
> +{
> +     int ret;
> +     struct imx_sc_msg_seco_get_build_id msg = {0};

Unnecessary default to 0

> +     struct imx_sc_rpc_msg *hdr = &msg.hdr;
> +
> +     hdr->ver = IMX_SC_RPC_VERSION;
> +     hdr->svc = IMX_SC_RPC_SVC_SECO;
> +     hdr->func = IMX_SC_SECO_FUNC_BUILD_INFO;
> +     hdr->size = 1;
> +
> +     ret = imx_scu_call_rpc(ipc, &msg, true);
> +     if (ret)
> +             return ret;
> +
> +     if (version)
> +             *version = msg.version;
> +     if (commit)
> +             *commit = msg.commit;
> +
> +     return 0;
> +}
> +EXPORT_SYMBOL(imx_sc_seco_build_info);
> +
> +struct imx_sc_msg_seco_sab_msg {
> +     struct imx_sc_rpc_msg hdr;
> +     u32 smsg_addr_hi;
> +     u32 smsg_addr_lo;
> +};

This can be added when used

> +
> +/**
> + * imx_sc_seco_secvio_enable() - Enable the processing of secvio IRQ
> +from the
> + * SNVS by the SECO
> + *
> + * @ipc: IPC handle
> + *
> + * Return:
> + * 0 - OK
> + * < 0 - error.

Ditto

> + */
> +int imx_sc_seco_secvio_enable(struct imx_sc_ipc *ipc) {
> +     struct imx_sc_rpc_msg msg;
> +     struct imx_sc_rpc_msg *hdr = &msg;

Unnecessary 

> +     int ret;
> +
> +     hdr->ver = IMX_SC_RPC_VERSION;
> +     hdr->svc = IMX_SC_RPC_SVC_SECO;
> +     hdr->func = IMX_SC_SECO_FUNC_SECVIO_ENABLE;
> +     hdr->size = 1;

s/hdr->xxx/msg.xxx

> +
> +     ret = imx_scu_call_rpc(ipc, &msg, true);
> +     if (ret)
> +             return ret;
> +
> +     return 0;
> +}
> +EXPORT_SYMBOL(imx_sc_seco_secvio_enable);
> +
> +struct imx_sc_msg_req_seco_config {
> +     struct imx_sc_rpc_msg hdr;
> +     u32 data0;
> +     u32 data1;
> +     u32 data2;
> +     u32 data3;
> +     u32 data4;
> +     u8 id;
> +     u8 access;
> +     u8 size;
> +} __packed __aligned(4);
> +
> +struct imx_sc_msg_resp_seco_config {
> +     struct imx_sc_rpc_msg hdr;
> +     u32 data0;
> +     u32 data1;
> +     u32 data2;
> +     u32 data3;
> +     u32 data4;
> +} __packed;

Can we use the following style for better readability?
struct imx_sc_msg_get_clock_parent {
        struct imx_sc_rpc_msg hdr;
        union {
                struct req_get_clock_parent {
                        __le16 resource;
                        u8 clk;
                } __packed __aligned(4) req;
                struct resp_get_clock_parent {
                        u8 parent;
                } resp;
        } data;
};

> +
> +/**
> + * imx_sc_seco_secvio_config() - Configure a set of SNVS registers for
> +SECure
> + * VIOlation

Secure Violation?

> + *
> + * Some registers are extended by others registers, they configure the
> +same
> + * kind of behavior, it constitutes a set
> + *
> + * @ipc: IPC handle
> + * @id: ID of the register, ie the offset of the first register of the
> +set
> + * @access: Write (1) or Read (0) the registers
> + * @data0: Data for the first register
> + * @data1: Data for the second register
> + * @data2: Data for the third register
> + * @data3: Data for the fourth register
> + * @data4: Data for the fifth register
> + * @size: Number of register to configure
> + *
> + * Return:
> + * 0 - OK
> + * < 0 - error.
> + */
> +int imx_sc_seco_secvio_config(struct imx_sc_ipc *ipc, u8 id, u8 access,
> +                           u32 *data0, u32 *data1, u32 *data2, u32 *data3,
> +                           u32 *data4, u8 size)
> +{
> +     struct imx_sc_msg_req_seco_config msg;
> +     struct imx_sc_msg_resp_seco_config *resp;
> +     struct imx_sc_rpc_msg *hdr = &msg.hdr;
> +     int ret;
> +
> +     if (!ipc)
> +             return -EINVAL;

Remove the unnecessary check

> +
> +     hdr->ver = IMX_SC_RPC_VERSION;
> +     hdr->svc = IMX_SC_RPC_SVC_SECO;
> +     hdr->func = IMX_SC_SECO_FUNC_SECVIO_CONFIG;
> +     hdr->size = 7;
> +
> +     /* Check the pointers on data are valid and set it if doing a write */
> +     switch (size) {
> +     case 5:
> +             if (!data4)
> +                     return -EINVAL;
> +             if (access)
> +                     msg.data4 = *data4;
> +             fallthrough;
> +     case 4:
> +             if (!data3)
> +                     return -EINVAL;
> +             if (access)
> +                     msg.data3 = *data3;
> +             fallthrough;
> +     case 3:
> +             if (!data2)
> +                     return -EINVAL;
> +             if (access)
> +                     msg.data2 = *data2;
> +             fallthrough;
> +     case 2:
> +             if (!data1)
> +                     return -EINVAL;
> +             if (access)
> +                     msg.data1 = *data1;
> +             fallthrough;
> +     case 1:
> +             if (!data0)
> +                     return -EINVAL;
> +             if (access)
> +                     msg.data0 = *data0;
> +             break;
> +     default:
> +             return -EINVAL;
> +     }
> +
> +     msg.id = id;
> +     msg.access = access;
> +     msg.size = size;
> +
> +     ret = imx_scu_call_rpc(ipc, &msg, true);
> +     if (ret)
> +             return ret;
> +
> +     resp = (struct imx_sc_msg_resp_seco_config *)&msg;
> +
> +     /* Pointers already checked so we just copy the data if reading */
> +     if (!access)
> +             switch (size) {
> +             case 5:
> +                     *data4 = resp->data4;
> +                     fallthrough;
> +             case 4:
> +                     *data3 = resp->data3;
> +                     fallthrough;
> +             case 3:
> +                     *data2 = resp->data2;
> +                     fallthrough;
> +             case 2:
> +                     *data1 = resp->data1;
> +                     fallthrough;
> +             case 1:
> +                     *data0 = resp->data0;
> +             }
> +
> +     return 0;
> +}
> +EXPORT_SYMBOL(imx_sc_seco_secvio_config);
> +
> +struct imx_sc_msg_req_seco_dgo_config {
> +     struct imx_sc_rpc_msg hdr;
> +     u32 data;
> +     u8 id;
> +     u8 access;
> +} __packed __aligned(4);
> +
> +struct imx_sc_msg_resp_seco_dgo_config {
> +     struct imx_sc_rpc_msg hdr;
> +     u32 data;
> +} __packed;

I may suggest you to follow the same style as I showed above 
struct imx_sc_msg_get_clock_parent

> +
> +/**
> + * imx_sc_seco_secvio_enable() - Configure the DGO module

Wrong function name

> + *
> + * @ipc: IPC handle
> + * @id: ID of the register, ie the offset of the register
> + * @access: Write (1) or Read (0) the registers
> + * @data: Data for the register
> + *
> + * Return:
> + * 0 - OK
> + * < 0 - error.
> + */
> +int imx_sc_seco_secvio_dgo_config(struct imx_sc_ipc *ipc, u8 id, u8 access,
> +                               u32 *data)
> +{
> +     struct imx_sc_msg_req_seco_dgo_config msg;
> +     struct imx_sc_msg_resp_seco_dgo_config *resp;
> +     struct imx_sc_rpc_msg *hdr = &msg.hdr;
> +     int ret;
> +
> +     if (!ipc)
> +             return -EINVAL;

Remove unnecessary check

> +
> +     hdr->ver = IMX_SC_RPC_VERSION;
> +     hdr->svc = IMX_SC_RPC_SVC_SECO;
> +     hdr->func = IMX_SC_SECO_FUNC_SECVIO_DGO_CONFIG;
> +     hdr->size = 3;
> +
> +     if (!data)
> +             return -EINVAL;
> +     if (access)
> +             msg.data = *data;
> +
> +     msg.access = access;
> +     msg.id = id;
> +
> +     ret = imx_scu_call_rpc(ipc, &msg, true);
> +     if (ret)
> +             return ret;
> +
> +     resp = (struct imx_sc_msg_resp_seco_dgo_config *)&msg;
> +
> +     if (!access && data)
> +             *data = resp->data;
> +
> +     return 0;
> +}
> +EXPORT_SYMBOL(imx_sc_seco_secvio_dgo_config);
> diff --git a/include/linux/firmware/imx/ipc.h 
> b/include/linux/firmware/imx/ipc.h
> index 89105743..6924359 100644
> --- a/include/linux/firmware/imx/ipc.h
> +++ b/include/linux/firmware/imx/ipc.h
> @@ -25,6 +25,7 @@ enum imx_sc_rpc_svc {
>       IMX_SC_RPC_SVC_PAD = 6,
>       IMX_SC_RPC_SVC_MISC = 7,
>       IMX_SC_RPC_SVC_IRQ = 8,
> +     IMX_SC_RPC_SVC_SECO = 9,
>  };
> 
>  struct imx_sc_rpc_msg {
> diff --git a/include/linux/firmware/imx/sci.h 
> b/include/linux/firmware/imx/sci.h
> index 22c7657..914dce1 100644
> --- a/include/linux/firmware/imx/sci.h
> +++ b/include/linux/firmware/imx/sci.h
> @@ -15,6 +15,7 @@
>  #include <linux/firmware/imx/svc/misc.h>  #include
> <linux/firmware/imx/svc/pm.h>  #include <linux/firmware/imx/svc/rm.h>
> +#include <linux/firmware/imx/svc/seco.h>
> 
>  int imx_scu_enable_general_irq_channel(struct device *dev);  int
> imx_scu_irq_register_notifier(struct notifier_block *nb); diff --git
> a/include/linux/firmware/imx/svc/seco.h
> b/include/linux/firmware/imx/svc/seco.h
> new file mode 100644
> index 0000000..25450ad
> --- /dev/null
> +++ b/include/linux/firmware/imx/svc/seco.h
> @@ -0,0 +1,73 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright 2020 NXP
> + *
> + * Header file containing the public API for the System Controller (SC)
> + * Security Controller (SECO) function.
> + *
> + * SECO_SVC (SVC) Security Controller Service
> + *
> + * Module for the Security Controller (SECO) service.
> + */
> +
> +#ifndef _SC_SECO_API_H
> +#define _SC_SECO_API_H
> +
> +#include <linux/errno.h>
> +#include <linux/firmware/imx/sci.h>
> +
> +/*
> + * This type is used to indicate RPC RM function calls.

s/RM/SECO

Regards
Aisheng

> + */
> +enum imx_sc_seco_func {
> +     IMX_SC_SECO_FUNC_UNKNOWN = 0,
> +     IMX_SC_SECO_FUNC_BUILD_INFO = 16,
> +     IMX_SC_SECO_FUNC_SECVIO_ENABLE = 25,
> +     IMX_SC_SECO_FUNC_SECVIO_CONFIG = 26,
> +     IMX_SC_SECO_FUNC_SECVIO_DGO_CONFIG = 27, };
> +
> +#if IS_ENABLED(CONFIG_IMX_SCU)
> +int imx_sc_seco_build_info(struct imx_sc_ipc *ipc, uint32_t *version,
> +                        uint32_t *commit);
> +
> +int imx_sc_seco_secvio_enable(struct imx_sc_ipc *ipc);
> +
> +int imx_sc_seco_secvio_config(struct imx_sc_ipc *ipc, u8 id, u8 access,
> +                           u32 *data0, u32 *data1, u32 *data2, u32 *data3,
> +                           u32 *data4, u8 size);
> +
> +int imx_sc_seco_secvio_dgo_config(struct imx_sc_ipc *ipc, u8 id, u8 access,
> +                               u32 *data);
> +
> +#else /* IS_ENABLED(CONFIG_IMX_SCU) */
> +static inline
> +int imx_sc_seco_build_info(struct imx_sc_ipc *ipc, uint32_t *version,
> +                        uint32_t *commit)
> +{
> +     return -EOPNOTSUPP;
> +}
> +
> +static inline
> +int imx_sc_seco_secvio_enable(struct imx_sc_ipc *ipc) {
> +     return -EOPNOTSUPP;
> +}
> +
> +static inline
> +int imx_sc_seco_secvio_config(struct imx_sc_ipc *ipc, u8 id, u8 access,
> +                           u32 *data0, u32 *data1, u32 *data2, u32 *data3,
> +                           u32 *data4, u8 size)
> +{
> +     return -EOPNOTSUPP;
> +}
> +
> +static inline
> +int imx_sc_seco_secvio_dgo_config(struct imx_sc_ipc *ipc, u8 id, u8 access,
> +                               u32 *data)
> +{
> +     return -EOPNOTSUPP;
> +}
> +#endif /* IS_ENABLED(CONFIG_IMX_SCU) */
> +
> +#endif /* _SC_SECO_API_H */
> --
> 2.7.4

Reply via email to