On 10/20/20 8:44 AM, Gene Chen wrote:
Jacek Anaszewski <jacek.anaszew...@gmail.com> 於 2020年10月9日 週五 上午5:51寫道：
Hi Gene,
On 10/7/20 3:42 AM, Gene Chen wrote:
From: Gene Chen <gene_c...@richtek.com>
Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode,
3-channel RGB LED support Register/Flash/Breath Mode, and 1-channel for
moonlight LED.
Signed-off-by: Gene Chen <gene_c...@richtek.com>
---
drivers/leds/Kconfig | 12 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-mt6360.c | 783
+++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 796 insertions(+)
create mode 100644 drivers/leds/leds-mt6360.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 1c181df..c7192dd 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -271,6 +271,18 @@ config LEDS_MT6323
This option enables support for on-chip LED drivers found on
Mediatek MT6323 PMIC.
+config LEDS_MT6360
+ tristate "LED Support for Mediatek MT6360 PMIC"
+ depends on LEDS_CLASS_FLASH && OF
+ depends on LEDS_CLASS_MULTICOLOR
Since CONFIG_LED_CLASS_MULTICOLOR can be turned off you need to have
below instead:
depends on LEDS_CLASS_MULTICOLOR || !!LEDS_CLASS_MULTICOLOR
Unless you want to prevent enabling the driver without RGB LED,
but that does not seem to be reasonable at first glance.
May I change to "select LEDS_CLASS_MULTICOLOR"?
I suppose RGB always use multicolor mode.
You will also have moonlight LED that will not need multicolor
framework. Is it somehow troublesome to keep "depends on"?
--
Best regards,
Jacek Anaszewski
