The USB OTG controller cannot be used until the power-domain is enabled unless it was started in the bootloader.
Adding the power-domain reference to the OTG node allows the OTG controller to operate. Signed-off-by: Adam Ford <[email protected]> diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 27733fbe87e9..605e6dbd2c6f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -979,6 +979,7 @@ usbotg1: usb@32e40000 { assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>; fsl,usbphy = <&usbphynop1>; fsl,usbmisc = <&usbmisc1 0>; + power-domains = <&pgc_otg1>; status = "disabled"; }; -- 2.25.1
