On 02-10-20, 15:01, Al Cooper wrote: > The 7211a0 has a tca_drv_sel bit in the USB SETUP register that > should never be enabled. This feature is only used if there is a > USB Type-C PHY, and the 7211 does not have one. If the bit is > enabled, the VBUS signal will never be asserted. In the 7211a0, > the bit was incorrectly defaulted to on so the driver had to clear > the bit. In the 7211c0 the state was inverted so the driver should > no longer clear the bit. This hasn't been a problem because all > current 7211 boards don't use the VBUS signal, but there are some > future customer boards that may use it.
Applied, thanks -- ~Vinod
